Large Slider: Will Work with LED Dimmer switch with Memory. On/ Off switch with Dimmer Three wire hook up Operating voltage 9V DC – 16V DC. 10 Amp Max. Easy mounting with hidden screw holes. Plate size 2-7/8″ high x 3″ wide, Front of cover plate extends 3/8″ out from wall min. hole cut out size 1-3/4″ h x 2-1/4″ w Other Styles: Cover snaps over switch base plate for a clean look and easy installation and service -Includes 1 switch base and cover with on-off switch’s with slider on side(as shown) -Overall Size: 1-7/8″ wide x 2- 7/8″ tall x 3/8″ Deep -Minimum hole cut out size 1-1/2″ tall x 1-1/8″ wide -Commonly used for lights, pumps, fans, vents and many other uses in RVs, Buses, Horse Trailer Conversions, Haulers, Travel Trailers, Boats and more.
Product Features
- 12 Volt Dimmer Switch Is Available in Turn, Slider, and Large Slider Styles
- 12 Volt DC Dimmer. Dims up to 60 watts (4.2 amps) of incandescent, halogen, or LED lighting reducing heat and power drain on batteries
- Commonly used for lights in RVs, Buses, Horse Trailer Conversions, Haulers, Travel Trailers, Boats and anywhere 12 volt DC power is present. Fits in small spaces.
- Available in Black, White, Almond, and Brown
- Engineered and manufactured in the USA
If you have an RV that came with incandescent bulbs this is the dimmer you need. This is a high side dimmer and works great with my LED retrofit. The older dimmers that came on RV’s before LEDs do not work so well with LEDs. This one works flawlessly and my LEDs are now brighter in the bedroom too. You will need a ground in the wall some where to tap into if you have an old school inline dimmer. There are 2 different types of dimmers, High side and Low side. Many of the Dimmers on Amazon are Low side dimmers. High side – the switch is wired in before the load on the +12…
Great product which provides effecient, flicker-free dimming. I have made several 10 watt LEDs ceiling lamps to replace florescent fixtures in my trailer… Far more light at half the amperage.This dimmer works great and provides a smooth flicker-free transition from full bright to the lowest dim setting. Installation instructions were clear and construction quality is good.For those who are wondering, high side means that voltagr/current is controlled on the positive wire. Low side means the voltage/current is controlled by…
Comments are disabled for this post.