Bright LED Strip Tube Lights for Car Headlight Replacement and Modification
Specification:
Length: 60CM / 24 Inches
Waterproof: IP65
long lifespan : >50,000 hours
Working Voltage: DC 12V
LED Type: SMD 3014
Package Included:
2Pcs * 24 Inches LED strips tube lights
Several clips and screws
Features:
– Fast on / off response time
– Dual color white / sequence amber switchback function LED strip
– Soft and easy to make any shapes or length to fit the headlight retrofit
– DRL driving light and turn signal light-work as a daytime running light with white light and work as a turn signal light with following yellow light
– High luminous efficiency with high brightness lighting output, superior illumination and stability
– Environmental-friendly, energy saving, shock-proof, waterproof and vibration resistant
– Universal fit for any DC12V vehicles
For Car Light Modification
Used for car exterior decoration light: Angel Eye Light, Daytime Running Lights, Turn Signal Lights, Eyebrow Lights, Rear Window Lights, etc
Used for car interior decoration light: Floor Lights, Pedal Lights, Brake Lights, Trunk Lights, Door Lights, Instrument Lights, Car Dome Lights, etc
Moreover:
This LED strip light tube also can be used for boat, motor, cabinets, tables, chairs, stairs, and anywhere you want, it will add aesthetic appeal
There are 3 cables, YELLOW RED and BLACK
1. the Black connect to ground line
2. the Yellow connect to turning cable – the led strip shows flowing amber(yellow) light
3. the Red connect to running cable – the led strip shows white light
Tips for your cutting DIY installation:
1. Power off during your customizing installation
2. Make 3-Leds as a team and cut every 3-LEDs
3. Make sure no debris gets in
4. Sealing the tube with insulated glue after cutting in short,light tubes cannot be folded
Product Features
- ▲HIGH PERFORMANCE:Lumen:1200,Pure high brightness,highlight seamless,import lights core,quality assurance, heat dissipation quickly,lasting lighting, As running light, it will be white when the car is running; as turn signal light, it will be sequential flowing yellow(amber) sequential when the car is turning
- ▲FlexBeam LED DRL Tube with Signal-Sync:Flexibility is very good,soft and easy to make any shapes and length to fit into your headlight retrofit;Very strong plasticity,silicone is a kind of highly active adsorption material,the strip light no matter how twisted recovery is very good,non-flammable fire retardant burn
- ▲WATERPROOF:The LED strips adopt waterproof buckled plug design with short circuit protection for more safe driving. High luminous efficiency with high brightness light output,Cool clear white light without dark spots, no dead light, superior illumination & stability in rainy or foggy days.Bright at day and night,clearer line of sight when driving
- ▲NEWEST DESIGN to INSTALL EASILY LESS THAN 3 MINUTES: The LED Strip Tube Lights can paste outside of the headlights directly without disassembling the headlight,super easy to install,just require right connect to the positive (+) and negative (-) side, It can be cut to any size and re-capped,after cutting, the tail must be insulated, otherwise it will be short-circuited
- ▲The led tube light can be used for car headlight, daytime running light, turn signal light, angel eye light, and so on. Brighter and clearer than the original halogen lamps of your car. Compatible for most of vehicles like cars SUV vans trucks boats with DC 12V power.100% REFUND within 30 DAYS and 12 MONTHS FREE REPLACEMENT,NOTE:Any problems,please send e-mail to us at first time!!!
Ideal brightness, easy to install Awesome results so far. Very simple to install given you have experience working with small wires, wire nuts, and crimping wire connectors. I successfully spliced into the truckâs stock parking and turn signal lights. Doing so, made it possible to turn on the DRLâs by using your factory parking/headlights switch.Photos included, represent parking lights/DRL only on and headlights/parking/DRL all on. Video demonstrates the turn signal…
DRL is not very bright during the day, but turn signals are. The lights themselves aren’t that difficult to install. I opted to tap into my drl highbeams in order to have them powered instead of tapping into the fuse box. The wires were pretty short for my use so I had to use my own wires to lengthen the wiring. If you’re planning to install them near your fog lights then be aware of possibly doing the same. Also the wires didn’t come with any crimps and connectors so if you don’t have any then you’re be out of luck unless you have your own. I deducted a…
Comments are disabled for this post.