Our 12V DC power supplies provide the power you need to light up your LED light strips or other low voltage devices by converting your 110-240V AC power to the 12V DC that LED strips run on. They’re available in various power ratings, from 15 Watts to 150 Watts and in various styles, from compact models that plug directly into your wall outlet to larger units capable of powering several rolls of strip.
36-Watt (3 Amp) specifications :
• Input : 110V-240V AC – (Direct wall plug – standard North American NEMA 1)
• Output : 12V DC / 36 Watts (3 Amps) – Four foot output cable with 5.5 x 2.1 mm DC jack
• Dimensions : 36 x 85 x 47 mm (1-3/8 x 3-3/8 x 1-7/8 inches)
• Warranty : 1 Year
• Model Number : PWR-12V-036-30-BK / 120300
Installation Instructions :
• Plug AC Cord into wall outlet
• Connect DC output plug to DC input plug on your LED light strip, controller or dimmer
Product Features
- 12V DC OUTPUT FOR LED LIGHT STRIPS or any other low voltage devices, such as security cameras, audio/video gear or automotive equipment.
- RATED FOR 36 WATTS / 3 AMPS – Enough power to run a full roll of 150 LED 5050 light strip. See also our larger power supplies (up to 150 watts).
- PLUGS DIRECTLY INTO YOUR WALL OUTLET, no hardwiring and no electrician required. Four feet of output cable and a standard 5.5 x 2.1mm DC jack (positive tip) make one step connections to most single color LED light strips, dimmers, or RGB controllers.
- HITLIGHTS QUALITY. Backed by a one year warranty from HitLights for peace of mind. Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation.
NOT a 12V power supply This supply only puts out 11 to 11.3 VDC, Which means your LEDs will be 30 to 35% dimmer than if they were supplied by an actual 12V supply. Why is Voltage so critical? LEDs are constant-voltage devices, so in a 12V LED strip it takes 7.2V just to get a sign of life out of the LEDs. The resistor with each group of 3 LEDs limits the current so they won’t burn up, but if the group is not supplied with 12V, they don’t get to full brightness, either. The strip on which they are mounted also has…
Serves my purpose I bought this product to power my camera slider which needed a 12v source, and since it is a portable slider i needed the power source to be portable as well. The one i got doesn’t look exactly like the one in the pictures but it serves the purpose and works just fine.**If you buy this item keep in mind that when charging you need it to be set to ON (I) and not off (O), the wall plug itself has a small led which is red when charging and turns green when fully charged.***Added…
Comments are disabled for this post.