')){kind=link}
10mm wide 4 pin SMD5050 RGB LED Light Strip Connector Adapter- 6 Inch Long(10 Pack)
Product Features :
Connect your SMD5050 RGB LED strip light to another strip light, dimmer, or power supply
Simple, tool-free installation
Installation Instructions:
1.Ensure your section of LED light strip has four contacts (+, B, R and G) and all the contacts all clean.
2.Open the white clasp of the connector.
3.If you have a waterproof LED strip, you should peel off silicon on the surface around soldering/Cutting line area, then insert the LED light strip into the clasp, with the 4 contacts of the led strip under the 4 prongs of the connector- make sure to match the + side of the strip to the + side of the clasp;
If you have a non-waterproof LED strip, just insert the LED light strip into the clasp, with the 4 contacts of the led strip under the 4 prongs of the connector- make sure to match the + side of the strip to the + side of the clasp.
4.Close the clasp.
5.Gently pull the LED light strip to confirm you’ve made a solid connection.
6.Your connection is successfully made!
Note:
Different LED strip lights have different thickness. If you find your LED strip light is too thin and the connection is loose, please insert something insulative under your LED strip light to increase the thickness to make the 4 copper contacts on your LED strip light connect tightly with the 4 prongs in these connectors.If the connection is loose, it will cause poor conductivity, and the LED color will not be consistent.
Our connectors and extensions are fully bendable and are perfect for extending LED light strip across a gap, around an obstacle, or for making a bend.
Package includes:
10x RGB 5050 LED Strip Connector Adapter Cable
10x Male to Male 4-Pin Plugs
Product Features
- Fits SMD5050 RGB LED chips with 10mm 4pin wide strip
- Connect your SMD5050 RGB LED strip light to another strip light, dimmer, or power supply
- Easy to Install: No need to solder. Just clasp your prepared led strip section into the connector to get connected.
- Flexible & Durable: Each cable consists of 4 individaul wires, flexible and durable enough for bending or twisting in ANY ANGLES without breaking.
- From TronicsPros: Package Comes with Unique Amazon Barcode. 10pcs inside.
Related Posts
Sajanic LED Clamp White light USB Rechargeable Lightweight Touch Sensor Table Lights Adjustable Brightness Night light or Reading Light Clip Type Portable for Indoor & Outdoor Pack of 1 Product Details: […] Posted in Solar Dock Lights![Dual Head LED Plant Grow Light,10W 360° Flexible Indoor Grow Light Plant Grow Lamp with Controllable Luminious Level for Indoor Plants, Hydroponic Gardening, Greenhouse, Office [UPGRADED 2018]](http://ledlightingdistribution.com/wp-content/uploads/2018/01/41YUhuSIGnL-150x150.jpg)
Dual Head LED Plant Grow Light,10W 360° Flexible Indoor Grow Light Plant Grow Lamp with Controllable Luminious Level for Indoor Plants, Hydroponic Gardening, Greenhouse, Office [UPGRADED 2018] Forsous Dual Head LED Grow Light, […] Posted in LED Grow Lights
Mchoice 3M Battery Operated Luminescent Neon LED Lights Glow EL Wire String Strip Rope (Dark Blue) Specifications:
100% brand new high […] Posted in Rope and String Lights
and I found these super easy to install Pros: I am not technically inclined, and I found these super easy to install. The prongs make them almost idiot-proof… which was a good thing for me as I had to reposition them a few times. Also, you don’t have to cram the LED strip down (I thought I needed to at first. Again… idiot-proof). Just place the strip lightly onto the prongs, give it a light press to keep it in place, and shut the plastic cover. The plastic cover will press the LED strip down enough to give it a good…
Perfect connectors for waterproof LED strips These connectors are great. They are so easy to use. There is no need to pull back the silicone off of the LED strip. These connectors have prongs that pierce through the insulation and make contact with the solder points. All you have to do is open the clip on the connector, lay the LED strip on the prongs and close the clip with some force until it latches in place. Just make sure that the connections match as you lay the strip into the connector.I really like the fact that…
Comments are disabled for this post.