')){kind=link}
Package Includes:
100 pcs led strip clips
100 pcs screws
These led clip are mounting brackets clips which suitable for WATERPROOF LED light strip , to fix by one screw for each clip, don’t affect the lamp brightness.
Ideal for Waterproof Strip Width 8mm
The bracket has 9mm hollow distance and 3mm hollow height. It is ideal fixture to mount the SMD3528,2835,3014 LED waterproof strip light within 8mm width.
Ultra-thin appearance design
This mounting brackets has an ultra-thin appearance design, which made it can hold the lighting effect of the strip light completely and no damage on brightness.
Upgraded installation process
The upgraded installation process made it easy to fix by one screw for each clip. You can take it down from the other end side freely when you want to replace or maintain the LED strip lights
Specifications:
Hollow distance: 9mm
Hollow height(Max.): 3mm
Material: plastic nylon 66, UL 94V-0
screw: 3*10mm
Use and installation:
1.When you receive the LED strip clips, Please check out whether the sizes of the clips are compatible with your LED light strip or not.
2. Shut down the power before installing the clips.
3. Rip off the 3M paper on the adhesive tape behind the strip light, then choose an proper place for installing the strip light.
4. Plan the mounting holes and make the markings, suggested using 3 – 6 pieces clips within 1 meter long strip lights.
5. Due to the very small clips, suggested firstly putting screws through the clips and then fixed the screw in the marked mounting holes(Pls be careful not to tighten it completely).
6. Adjust these led clips so that they can coincide with the strip surface, and then continue to tighten the screw until the clip completely clamp light strip.
7. After complete the installation, please check whether all are in place.
Product Features
- These LED clip are suitable for 3528/3014 WATERPROOF LED light strip within 8mm width
- Easy to fix by one screw for each clip, take down the LED light strip from the other end freely when replace or maintain it
- Ultra-thin appearance design, Safe and secure to hold led light strip, no damage on brightness
- These LED strip clips were designed for screwing into wood materials such as cabinet, Wardrobe,bookcase
- 100pcs of mounting bracket clips and 100pcs screws included, easy to fix by one screw for each clip, keep the LED strip secure
Related Posts
WYZworks 25 feet 1/2″ Thick COOL WHITE Pre-Assembled LED Rope Lights with 10′, 50′, 100′, 150′ option – Christmas Holiday Decoration Lighting This LED rope light is your must-have […] Posted in Rope and String Lights
Airsspu Camping Lantern,Outdoor LED Lantern Flashlights Water Resistant Home Garden Portable for Hiking, Emergencies, Hurricanes (Black,2Pack) Description:This pretty cool little […] Posted in LED Flashlights
Philips 43mm festoon X-tremeVision LED 6000K Interior light (Pack of 1) Philips LED Interior/Exterior Retrofit […] Posted in LED Tail Lights
These bracket clips work just fine on my LEDMO 5630 LED strips. I used this with the LEDMO 5630 LED strips. My LEDs were waterproof, so they were a little thicker. But these mounting clips still worked fine. I like how they only had one hole for mounting, since I mounted my LEDs vertically, on the inside of a wood cabinet face. See photos. They are just springy enough to allow some give, but still keep the LED strip secure. You might as well not even use the built-in double-sided tape that comes on the back of the LEDs, as it will not stick to wood…
Good but Maybe Consider a Smaller Size Worked well and the screws provided were the correct size for the clip. One tip: Depending on your project specifics, consider the 8mm or other version especially if it is more shallow that this one. The 10mm clip fit over my 10mm LED strip and convex rubber coating but it left a tiny space between the rubber of the LED strip and the clip. As a result the clip will cradle the strip if the strip is not adhered to the cabinet or if its adhesive fails but the clip does not press or hold the strip…
I bought this to install the Aglaia LED RGB 5050 waterproof Light Strip since the 3M tape wasn’t holding it to my ceiling. I’m not sure what the ceiling is, but it has a texture like a jute bag but is fairly thin. I had to use an ice pick to start the holes then use a screwdriver to manually screw them almost all the way in then put the LED light strip under and then tighten it, but even then there is still a lot of play, I thought this would be like the cable clips which once hammered in…
Comments are disabled for this post.