){kind=link}
Technical Specification:
Plug Type: H13,Hi-Lo Beam
Power(per set): 72W@high beam, 72W@ low beam
LED Quantity(each bulb): 3pcs* Bridgelux COB chips
Luminous Flux: 8000lm/set(4000lm/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP65 rated water and dust seal,over 30000hrs lifetime
Beam Angle: 270 degree@low beam,360 degree@high beam
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight
Introduction:
(2pcs/set)H13 Bridgelux COB Hi-Lo Beam LED headlight conversion kit
Latest Bridgelux COB chip (USA) light source,3 luminous faces(270/360 degree) no blind zone
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
Built-in constant current CPU, instant full brightness without start-up relay
Two-way heat dissipation channel
1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2.High speed mute fan (12000R/Min),high Air flow for faster cooling rate
Package Included:
2x H13 LED headlight bulbs
1x English installation manual
Product Features
- Operating Voltage: DC 9-32V(fit 12V,24V vehicles). Color Temperature: Pure White 6500K. IP65 rated water and dust seal,over 30000hrs lifetime. Operating Temperature: -40-80 degree Celsius. Usage: headlight.
- Latest Bridgelux COB chip (USA) light source,3 luminous faces(270/360 degree) no blind zone. Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light.
- Xenon white light reflect road paint/signs better to show clearer road situation during night driving. 270 degree low beam angle with cut-off line,will not dazzle oncoming traffic.
- All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature. Built-in constant current CPU, instant full brightness without start-up relay.
- Two-way heat dissipation channel: 1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating. 2.High speed mute fan (12000R/Min),high Air flow for faster cooling rate.
Related Posts
G4 LED Bulb 12V AC/DC, Bi-pin G4 Base 5Watt T3 Led Bulb Lighting Equivalent 40W Halogen Bulbs, Daylight White 6000K Light Bulbs for Landscape, Ceiling, Chandelier, Wall Sconce, Not-Dimmable (6-Pack) Specifications: Wattage: 5W Dimmable: […] Posted in LED DC Bulbs
Whaply Heavy Duty LED High Lumen Flashlight 3 Cell D Battery Flashlight Here's how much brightness you can […] Posted in LED Flashlights
Renaissance of the Celtic Harp His 1972 hauntingly beautiful and […] Posted in LED Grow Lights
Great Bulbs once you understand LED Headlights. There’s a few complaint found with these lights, and LED’s in general. Once you understand how to easily correct these issues, these are great lights.IF LIGHTS DON’T WORKIt’s not just the Auxbeam, but most LED lights are not wired the same way as the halogen’s that are currently in our cars and trucks. I may just be referring to U.S. vehicles here but I don’t know. For the LED’s with two pronged connectors (like the 9005’s and 9006’s), merely flip the connector. The locking…
Interestingly enough, the fans on these bulbs are MUCH quieter than the fans on my car’s headlight bulbs. I have 2 sets of $100 OPT7’s (high beams and low beams) and the fans on those sound like jet turbines. You can hear them screaming from inside the car, and very audibly from outside of the car. I bought these for my girlfriends 2006 Dodge Stratus. They didn’t fit the housings right, because the Stratus headlights have a black ring that goes around the base of the bulb to hold it in place…
These lights are awesome!!! My only complaint is the reversal of the plug. Since the 9006 standard comes with a notch on one side of the plug, I had to cut the notch and flip it in order to get the polarity on the correct side. Why canât car manufacturers and light developers ever get this right? Lol. It seems like thatâs always the answer to âif your lights donât work…â. I mean, if the notch is on one side, wouldnât the positive and negative directly translate the same way in every…
Comments are disabled for this post.