){kind=link}
Friendly Tips:
1. Please make sure your car has the four prong plug before buying, if not,you need to buy an adapter to make it work.
2. Please make sure your car fit the Length of 60 inches,and don’t cut the strip.
Features:
Condition:Brand New
Length:60 Inch
LED Type:2835 LED
LED Power:2.5W
Working voltage: DC12-14V
LED quantities:90pcs SMD(60pcs Red SMD + 30pcs White SMD)
Product weight: 0.15 KG/PCS
Tail lights:all red LEDs light up
Turn left:left LEDs light up
Turn right:right LEDs light up
Brake:all Red LEDs light up
Reverse:all White LEDs light up
Package includes:
1pcs Tailgate Light
Product Features
- Five-Functions:Red for Running&Parking,Turn signal and Brake,White for Reverse and Fogs Lights
- Perfect Bright: 2835 super bright Korea LED source,waking up the drunks and texters behind you
- High Quality: Epoxy process designed refuse moisture for long-term use,IP65 waterproof,fuse overload protection
- Easy Install: Mounts easily with high quality 3M automotive adhesive,plug the lights into your trailer light plug and it just works
- Widely Use: Completely compatible with most Cars,Trucks,Pickup,SUV,Dodge Ram,GMC,Ford, RV,VAN,Trailers,Ford,Chevy,etc
Related Posts
Benchmark by Viribright LED Light Bulb 1500 Lumen Dimmable 18W Par38 Outdoor IP55 Rated Cool White 4000K (75W Direct Replacement)
Viribright Benchmark LED 18W […] Posted in LED Lighting
Dysmio Lighting LED Exit Sign with Battery Backup – Red Letters
ILLUMINATION: •Ultra-bright, energy […] Posted in Sign Lights
Coda (Deluxe CD Edition) Presence, In Through The Out Door, and […] Posted in LED Lighting
Great looking light. I installed this light strip on a 2010 Ford F-150. Because there isn’t a flat surface on this generation of trucks, I cut a strip of rigid plastic I had and fastened that to the truck with double sided tape. Then I fastened the strip to that plastic. I have seen light bars that are specifically made for this reason, but they cost $120.Installation-Since 2 of the wires cannot be simply plugged in, I decided to cut the plug and hard…
Easy install installed this on my 2015 F150. Installation was simple with the exception of the reverse wire. The brake lights and turn signals run off of the 4 pin trailer wiring. There is no reverse in the 4 pin system so you have to find a different place to get the reverse wire. You can tap into the tail lights or in my case, I have the 7 pin next to the 4 pin. I used a scotch lock tap connector to get the reverse source, sealed it with dielectric grease and taped it up. I plan on doing that with the…
Comments are disabled for this post.