LED Lighting Distributors

The wiring harness for LED off road lights is the perfect accessory for off road vehicles, working vehicles, and any automobile that could use a relay to power specific equipment. Consisting of a power relay, an illuminated on/off switch, and more than 12 feet of wiring, this wiring harness for LED off road lights simplifies the installation process of powering various equipment on all automobiles.
Interchangeable/Compatible with:
All automobiles and devices equipped with a 10 to 30 Volt DC power source.
Features:

Illuminated on/off switch
Power Relay
30A Blade Fuse
More than 12ft of wiring
2 sets of power connectors to light fixtures

Product Content:
1 x Wiring Harness +user manual
Full Wiring Kit for All Light Bars with ON/ OFF switch for 7”;, 10”;, 13”;, 20”;, 30”;, 40”; 50”
Installation:
1. connect the the red+ wire from the fuse to battery +; connect the black wire from the reply to the battery – ;
2. connect the wire for lights bar from the relay; (red/black correspond to the wire of lights bar)
3. connect the white +/black- wire of the switch to battery or any place of your car system to get power for the switch
4. turn on on/off button of switch to test the lights bar

Product Features

• with ON/ OFF switch; easy to install,
• Power Relay, 30A Blade Fuse, ALL INCLUDE TO INSTALL YOUR LIGHTS.
• 2 sets of power connectors to light fixtures; can used for all LED Lights bar and work lights;
• More than 12ft of wiring;NOT LIKE OTHERS ONLY 8 FT; with this wiring harness you can connect 2 led work light or 2 small watt led light bar and any else off road use
• MICTUNING WIRING HARNESS MATERIAL PASSED UL CERTIFICATE, NOT LIKE OTHERS USE CHEAP MATERIAL.CAUTION: If the wiring harness wired to battery+/- directly, the switch glowing even when the vehicle is off; it will stop glowing only if it is hooked to a source on your fuse panel that is activated by the key; dont let the wiring harness short circuit, it will be melt.