TECHMAX 9006 LED Headlight Bulbs,Letting You Break Through The Darkness.
360°Adjustable Mounting Bracket,getting perfect beam pattern.
Specification:
Model:9006(HB4)
Input Power:72W Per Pair
Operating Voltage:DC 9-32 V
Luminous Flux:12000LM/Per Pair
IP Rate:IP65
Placement on Vehicle:Front Left/Right
Installation:Plug and Play.
Light Source Model:CREE Light Source Technology
Color Temperature:6500K
Heat Dissipation Theory:Aviation aluminum 6063
Operation Life:>30,000 hrs
Operating Temperature:-40°C~+80°C
Package:2 x 9006 LED Headlight Bulbs
These bulbs are CanBUS-Ready and will work with most vehicle’s computer system without error.If you are not sure whether the correct one,please contact us before purchasing.
Product Features
- Super Lighting:TECHMAX 9006 led headlight bulbs,adopting CREE Light Source Technology Chips,6500K xenon white,producing 12000 lumens per pair,5 times brighter than the halogen lamp,letting you break through the darkness.
- 360°Adjustable Beam Pattern:With the adjustable mounting bracket,you can adjust the beam angle by slightly rotate the metal bracket to get the focused beam pattern,without any dark spots and foggy light,giving you a wider vision.
- Efficient Cooling System:Utilizing pure copper substrate and all in one aviation aluminum body with thermal conductivity up to 400 W/mK,2 times better heat dissipation.With double ball bearing turbo fan,higher rotational speed,longer usage life.
- Easy installation:Direct replacement,plug and play,non-polarity design.Spend less time but replacing brighter lights.These bulbs are CanBUS-Ready and will work with most vehicle’s computer system without error.
- Longer Lifespan:Utilizing IP65 waterproof technology,which is dust-tight and moisture-tight,keep the bulb can work in different conditions.Greatly extend the usage lifespan of the bulb more than 30,000 hours.
Nice cutoff on Reflector style headlights I was worried that these LEDs would disappoint. I had tried a different set or csp LEDs and was not happy with the beam pattern. I have a 2015 Toyota Tundra with reflector housings headlights. The OEM halogens already had a well defined cutoff. The cap LEDs from Sealight added additional glare above the cutoff and I lost some light below the cutoff.These LEDs from Techmax have a near identical beam pattern and cutoff to the halogen bulbs. They also light up the road a lot more. It…
so far so good the “bulbs” came quick and installed reasonably easy in a Generation 2 Prius. There weren’t any instructions, so had to figure out how they came apart to install. Took about 10 minutes, no real tools required (used my key to pry out two plastic connectors to gain access on the passenger side). Two things, 1 the bulbs come apart, the plate twists and then pulls off, clip that on the headlight housing first, then put the rubber boot back on and lock…
Comments are disabled for this post.