JULLISON Recessed 3 Inch Gimbal Round LED With Integral Driver In Connection Box
● Unique Design: Gimbal with 30° tilt and 360° rotation, Yet Air-Tight Without Housing Needed.
● Body: Durable, Die Casting Aluminum Alloy for Optimal Heat Dissipation.
● Paint: Oil Based Spray Painted – Scratch Resistant And Smooth Finish.
● LED: Epistar COB Custom Packaged by Hongli Tronic with LM80. Guaranteed 98% Lumen Maintenance After 6,000 Hours. Strict Binning To Ensure Consistent Lighter Color.
● Connection Box: Saves Contractors Labour In Installation On Every Job.
SPECIFICATION:
● Applications: Sloped Ceilings, Highlighting Artwork and many more.
● Power: 7 Watts
● Light Output: 600 Lumens
● Color Temperature: 3000K
● Beam Angle: 38 ° with 30° tilt and 360° rotation
● CRI: 80+
● Approved Location: Insulated Ceiling & Damp Locations
● Projected Life: 70% Light Output at 50000 Hours
● Certification: cETLus, Energy Star
● Warranty: 5 Years
WARNING:
1. Read all instruction before installing fixture. Make certain power is OFF from the electrical panel before starting installation or attempting any maintenance.
2. For safety, this fixture must be wired in accordance to local electrical codes. All work should be done by a qualified electrician.
Product Features
- ● HOUSING KILLER: No pot housing or traditional can/trim is required even for insulated ceilings and dry walls as it is IC rated and AIR TIGHT certified; huge cost saving on using the fixture with light, trim and junction box in a unit.
- ● ENERGY SAVING: Gimbal recessed light with remote junction box, 360 degrees rotation and 30 degrees horizontal tilting; 600 lumens at CRI90+, over 85% saving on electricity bills as of 50 watts replacement using 7 watts only.
- ● SIMPLE INSTALLATION: Solid die casting heat sink maintains the excellent heat dissipation performance; in-built quality COB chip with elegant lens distributes welcoming light to eyes; 3 inch cut out, fast connecting with the input wires and prompt clip on the ceiling with spring helps on saving labor cost of installation.
- ● GREAT DIMMING: Smooth dimming for most of the regular triac/ELV wall dimmers from 5% – 100%, please refer to the product approved dimmer list for selecting a right one.
- ● QUALITY ASSURANCE: Passing strict safety and energy standard, ETL and Energy Star certified; 50,000 hours of L70 life and 5 years warranty; suitable for damp location.
EXCEPTIONALLY ENGINEERED PRODUCT These are the answer to the ILLEGAL small LED fixtures that have an attached driver but no junction box for the conversion from line voltage to LED driver voltage. The fixture is a tiny 2″ tall with the clips pre-installed. (THANK YOU!) Simply cut a hole in the ceiling surface and mount. The junction box is independent of the fixture and has 2 mounting holes (the only problem with the mounting holes is one is located behind the wire entry and would be impossible to use if you prewire…
Great lights! By code, your electrical cable to the junction box must be secured with a cable clamp/connector. The common style of clamp with a threaded locknut ring will not work with these tiny junction boxes that have a huge 7/8″ knockout, as the locking ring is too large to turn onto the threads – not enough clearance in the box, you would have to grind off the tabs on the locknut ring to make it smaller. If the knockout was 1/2″, a 1/2″ locknut style clamp would probably work. The “tilt-in” style of…
Comments are disabled for this post.