LED Lighting Distributors

Parameter

5m 5050 LED strip
Model: 5m/roll 5050 RGB LED strip
Light source: SMD 5050
Emitting Color: RGB
FPCB color: White
LED quantity: 60 LEDs/m, 5m 300 LEDs in total
Protection Rate: IP65 Waterproof (Can’t be used underwater)
Working Voltage: 12V DC
Max Working Current: 5A
Max Output power: 60W
Beam angle: 120 °
Working temperature: -20℃ to 60℃
Size: L500cm (5M) x W1.0cm x T0.25cm
Net weight: 210g
Life span: >50000 hours

44-Key IR Remote Controller
16 colors
5 light patterns: Static/Flash/Strobe/Fade-change/RGB Smooth-change
16 classes Static Mode Dim Control
Input Voltage: 12V
Output Voltage: 12V
Max load current: 3A each color max (12A max in total)
Power: 144W max
Working temperature: -20℃ to 60℃
Net weight: 60g

12V 5A power supply
100% Brand New
Input Voltage: 100~240V AC
Output Voltage: 12V DC
Output Current:5A max
Safety Compliance: CCC /CE
Working Temperature: -20~60℃

Kindly note
1) Please spread all the strip from the tape before use. Otherwise, the strip will overheat in several minutes.
2) The LED strip is waterproof IP65, it can be used outdoor but not underwater. The power supply and remote controller is not waterproof. So please protect them well if you want to use them outdoor.

Package included
1 x 5 meters LED strip light
1x 12V 5A Power supply
1x 44key IR remote controller

Product Features

• Easy to install: Without any soldering and wiring, just connect the power supply, controller and LED strip together, they will work very well. It comes with self-adhesive 3M tape on its back, so you can fix it on dry and flat surface without screws and clips.
• Well protected: The LED strip is covered with clear silicone coating, which protects it very well from water and makes it easy to clean.
• Amazing color change: With the wireless remote, you can set 16 static colors, adjust 16 classes brightness, select 5 light patterns (static / flash / strobe / fade-change / RGB Smooth-change), and DIY the mode you like.
• Shorten, lengthen and bend freely: The LED strip can be cut off between every 3LEDs without damaging the rest strip. It comes with two connectors on both ends. You can connect two strips without soldering. It is also soft and flexible. You can bend it to the shape you want.
• Safe to use: The work voltage of the LED strip is 12V DC. It is touchable and safe to children.