Parameter
Model: 10m/roll 5050 RGB LED strip
Light source: SMD 5050
Emitting Color: RGB
FPCB color: White
LED quantity: 60 LEDs/m, 10m 600 LEDs in total
Protection Rate: IP65 Waterproof (Can’t be used underwater)
Working Voltage: 24V DC
Max Working Current: 5A
Max Output power: 120W
Beam angle: 120 °
Working temperature: -20℃ to 60℃
Size: L1000cm (10M) x W1.0cm x T0.25cm
Net weight: 410g
Life span: >50000 hours
Why choose us
If you need a long LED strip light, the 10m continuous LED strip is a good choice.
10m continuous length LED strip is equivalent to 2pcs 5m led strip and 1pc amplifier.
But if choose 10m LED strip, you don’t need to buy extra amplifiers, connectors, and power supply for amplifier. You also don’t need to connect or solder them. You will save much money, labor and time.
Kindly note
1) The wattage of 10m LED strip is about 120W. If the strip blinks or flashes, maybe the power is not enough for the strip. So the power supply for 10m led strip must be 24V 5A 120W at least. Please don’t use 12V power supply for this 24V LED strip.
2) The LED strip comes without power supply and controller.
3) Please spread the strip from the tape before use. Otherwise, the strip will overheat in several minutes.
Application
Used for home, garden, hotels, clubs, shopping malls decoration
Architectural decorative lighting, boutique atmosphere lighting
Extensively applied in back-lighting, concealed lighting, channel lighting
Emergency & security lighting, advertisement sign lighting
Decorative lights for holiday, event, show exhibition
Applicable for automobile and bicycle decoration, border or contour lighting
Package included
1 x 10 meters LED strip light
10x screws
5x silicone clips
(Power supply and connectors are not included)
Product Features
- Safe to use: This is a new generation 24V LED strip, which is much brighter than old 12V LED strip. But it is still touchable and safe to children.
- Fantastic color change: With a controller (which is not included), you can set static colors, adjust brightness and select various color changing modes. It is widely used for party, wedding, festival, holiday, Xmas, Halloween, etc
- Well protected: The LED strip is covered with clear silicone coating, which protects it very well from water and makes it easy to clean.
- Double fixation: It comes with self-adhesive 3M tape on its back, so you can fix it on most of the dry and flat surfaces. However, if you are mounting it against gravity or on irregular surface, the tape alone may not hold it. You can reinforce it with the clips and screws we present.
- Shorten, lengthen and bend freely: The LED strip can be cut off between every 6LEDs without damaging the rest strip. It comes with two connectors on both ends. You can connect two strips without soldering. It is also soft and flexible. You can bend it to the shape you want.
Bright light but extremely HOT! These lights were just what I wanted. The light is warm white and very bright. The issue is the amount of heat produced by the lights closest to the electrical connection. They get so hot that they will burn your fingers. The lights at the end of the run are warm but not hot. I am removing them from my application as I am very concerned they may catch fire. I split them in half and connected two separate transformers and they still get hot. Would return the item but have cut them in half to…
Comments are disabled for this post.