Alla Lighting ETI Newest Version Latest Design T20 7440 7443 LED bulbs replacement the halogen/incandescent turn signal light, brake stop tail light, daytime running light (DRL), back-up reverse light, side marker light bulb, etc
Alla Lighting pursues to offer the best valuable guaranteed 7443 led light bulbs for the customers, this led 7443 bulb adopts the original reflection light output with high illumination custom ETI led chips,6063 Aviation Aluminum and silver vacuum tube & built-in IC driver heat sink for much better heat dissipation to achieve longer lifespan & much further lighting distance.
Here is ETI T20 7440 7443 LED bulb’s specification
LED Chip Type: 56 pieces high quality and high illumination of ETI LED chips.
Heat Dissipation Technology::Newest technology double way heat dissipation -heat sink makes the bulb much better heat dissipation to achieve much longer lifespan up to 30000h.
High illumination light: Each T20 7440 7443 led bulb light output will be up to the maximum 1900 lumens in perfect condition (total 3800 lumens in total for both LED 7443 bulbs
Easy installation: Extra load resistors maybe required to avoid the signal hyper flash or error code. This happens due to led bulbs draw much less current than stock lamp.
Applications: Used for upgrading the turn signal light or brake tail stop light or back-up reverse light, or daytime running light, or side marker light, etc.
Optional colors: : 6000K xenon white / Amber Yellow / Pure Red.
Cross reference number: 992, 7440A, 7440AL, 7440NA, 7440, 7440LL, 7440ST, 7440NA, 7441, 7443, 7443LL, 7443ST, 7444NA, 7444ll, W21W, WY21W, etc.
Product Features
- (Set of 2) 1900 lumens per T20 7440 7443 LED Bulb, total 3800 lumens for both LED 7443 bulbs; Each 7440 7443 white LED bulb is equipped with high illumination and high power 56 pieces ETI LED chips.
- Built-in Intelligent IC driver and 6063 aviation aluminum material for best cooling and longer lifespan.
- Working Power: 8.5W, Volts: 12V ~ 24V; Waterproof IP67; Color: 6000k Xenon White ; Application: Used for upgrading turn signal blinker light, back-up reverse light, daytime running light ( DRL), brake stop light,tail lights, side marker light,etc.
- Fits T20 wedge base, Cross reference number: 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440A, 7440NAK, 7444NAK, 7443LL.etc. Extra load resistors maybe required to avoid the errorr code or hyper-flash.
- One year warranty. Please check the owner manual or the stock lamp to confirm the cross reference number before purchasing. Amazon fitment is only for reference, not 100% guaranteed accuracy.
Very bright and a really nice amber color to them. So, my factory halogen fog light bulb finally burnt out after 5 years. I figured I would try a LED and go from normal head light color to amber for better visibility through foggy conditions which is common for my area certain times of the year. I got them a few days ago and I installed them yesterday morning. This morning I drove to work and like many times this time of year it was pretty foggy. As I drove I could definitely tell a difference and also had good reflection of street signs…
Poor Quality Control
Dim – Useless for Fog Visibility They are a correct fit in a 899 socket, but they are not putting out 3800 lumens as a pair or 1900 lumens each. Have a look at the picture – they have less than half of the apparent brightness of the orange LED’s (from a different brand) that were rated at 3000 lumens/pair. They are properly aligned in the fog lamp housing, and I have ensured proper alignment of the housings for the proper “throw” angle.I verified this just last night in heavy fog – the kind that puts San…
Comments are disabled for this post.