This listing features one pair (2 pieces) super bright 7443 / 7440 pure red dual filament 3020 SMD LED bulbs, each bulb is about 1000 lumens, it may fit your vehicle one or more positions which varies depends on the vehicle, so please check the owners manual or the stock lamp to confirm the stock lamp’s part number is one of the cross reference number. it is especially designed for replacing the cars rear turn signal light or brake stop tail light.
Specification
1) Package: including 2 pieces extremely bright 7443 pure red high power 3020 30- SMD SMD led bulbs
2) LED Chips: 30 pieces high power 3020 chips per led bulb.
3) Cross Reference Number: 992, 7440A, 7440AL, 7440NA, 7440, 7440LL, 7440ST, 7440NA, 7441, 7443, 7443LL, 7443ST, 7444NA, 7444ll, etc.
4) Warranty: “One Year”guaranteed on manufacturer quality, built-in IC driver.
5)Please Note:Load resistors maybe required to avoid the error code or blinking.
Product Features
- (Set of 2) 1000 lumens per 7440 7443 LED Red bulb; LED Type: 30 pieces high power & high illumination 3020 SMD led chips per 7440/7443 red LED bulb
- Dimension: 0.75″ in width, and 1.95″ in length.360° full view angle. No UV or IR radiation,working voltage: 12V~18V.
- Cross Reference Number: 992, 7440, 7441, 7443, 7442, W21W, 7443LL, 7443K, 7440LL, 7440KX, 7443KX, etc.
- Applications: Used for replacing the stock rear brake stop or tail light or turn signal blinker light lamp, ONE YEAR warranty guaranteed. Color: Brilliant pure red
- For most vehicles, just plug and play, yet for some European vehicles, load resistors maybe required to avoid the flicking or error code.
These worked great in my Tacoma no Load Resister was required. I previously installed some LED turn signal bulbs in my 2011 Toyota Tacoma. The bulbs I installed(Left in the picture) did not have LED diodes on the front of the bulb and it caused rapid blinking that would indicate a burnt out bulb. I found out that I would need to install Load resistors in both turn signals to eliminate the rapid blinking. Not having the LEDs on the front of the bulbs severely limited the brightness of the turn signal. I ordered these (Right hand side of picture) and…
Not the cheapest – but among the brightest
These bulbs have a great red color These bulbs have a great red color, and are extremely bright. Don’t bother buying the “Red” LED’s that have clear diodes, they just don’t compare in brightness. These bulbs use a white LED coated with red epoxy to change the color. (White LED’s are the brightest due to their properties). A lot of bulbs claim to be super bright, but these truly are SUPER bright. Don’t hesitate if you’re considering buying, they are amazing bang for the buck. My only wish is that they had integrated…
Comments are disabled for this post.