Features:
5 large LED bulbs:
The working voltage is 4.5V, with timer function (30mins after auto off), energy saving.
Wireless remote control:
Effective receiving range is 10 meters. Need to replace the battery; the rotating lamp body can be taken down.
Note:
- 3m stickers sticky, fixed is not easy to remove, please carefully select the location before installation
- Please replace the battery in time, and do not use the old and new batteries in combination, excessive battery discharge may cause battery leakage.
- Please use branded dry cells. And in order to avoid battery leakage and detonation, please do not mix-use different brand of dry batteries .
- If you do not use the product for a long time, please remove the battery.
Specification:
LED Qty: 5 LED
Material: ABS
Power: 0.5W
Voltage: 4.5V
Mounting: 3M Tape Stick on or Screw Fixed
Light Battery Type: 3 X AA batteries (not included)
Remote Control Battery Type: 2 X AAA batteries (not included)
Switch Type: Touch or remote control
Control Distance: 10m
Dimension: 3.18 x 3.18 x 0.87 inches
Weight: 138g
Function Buttons on Remote:
*ON: High brightness
*OFF: Light off
*LOW: Low brightness
*Timer: Timer function (30 minutes after the automatic turn off)
Package Includes:
1*remote controller
3*LED light
3*3M double-sided adhesive
6*screw
1*manual
GCID: AMIR
Product Features
- Brightness Adjustable – 2 different brightness(high brightness/ low brightness) , can be adjusted by remote control, high brightness can last for 7 hours, low brightness can last for 15 hours, suitable for multi-environment, to facilitate your life.
- Unique Design – With white ABS plastic and silver aluminum alloy shell, 5 big bulbs, the working voltage is 4.5 V, requires 3 AA batteries (not included), energy saving.
- Remote Control – 4 large buttons (ON/OFF/LOW/TIME), which effective receiving range is 10 meters, one can control multiple lights, pass the wall control lights, 360 degrees without any angle remote control. Requires 2 AAA batteries (not included).
- Time Control – Remote control on the timer function keys, 30 minutes after the automatic shut down, the entire large lampshade is the switch, which is very convenient to press up, you can switch manually, only switch, no other features.
- Multiple Mounting Methods – Fix the two screws to the place where you want to place or use the attached 3M double-sided adhesive, one side to the back cover, the other side to the place to be placed. Then rotate the lamp to the back cover to use it.
Comments are disabled for this post.