If you want to join two pieces led strip light together without soldering, here is a solderless connector for you. It can firmly connect led strip light one by one without welding. The wire could be bent what ever angle you what to install your strips.
Intended use:This solderless connector is mainly designed for single color 5050 or 5630 non-waterproof led strip light. It is NOT suitable for RGB led strip light.
Warm Tips:
1)This connector is mainly used for conductive connection. If it is not easy to be fixed in some place, please do the soldering.
2)To avoid wrong connection, please pay attention to the positive and negative electrode and make corresponding connection.
3) If the PCB board is so thin that it could not be fixed firmly by the connector box, you may fix a little tape or a small piece of masking to make the PCB board enough thick, thus the connector could connect the strip light firmly.
4) To connect waterproof led strip light, please strip the silicon from the surface of the strip light before inserting it into the connector. You may use a little knife to cut the silicon and strip it off.
Package content:
10 x 2 pin LED Strip light connector
NOTES:The toal max connecting length for the led strip light is 16.4feet, if you have two 16feet sections to be connected, we suggest doing the soldering.
Service Information:
•In terms of product details or questions, please first contact our customer service center by email.
•Warranty: All products enjoy 12 months warranty and 30days full money refund.
Product Features
- Non stripping LED Strip Connector for 3014 5630 5050 single color led strip light
- 10mm wide;15cm length for every cable
- Easy to connect: cut the strip on the cut line, slide the LED light strips under the clips and close the clasp well to make a solid connection( please pay attention to the positive and negative electrode and make corresponding connection)
- 4 pin 22AWG flexible copper wire allow you bend the wires whatever angle you require
- No need welding or soldering; one year warranty
Work ok. Have to fight with them a bit to make a good connection, but they get the job done.
Comments are disabled for this post.