Length: 60CM.
Working Voltage: DC12V
Installation Guide:
Red wires = Positive for White
Yellow wires = Positive for amber
Black wire = Ground
HIGHLY recommend professional installation.
Please make sure that you test the lights prior to installing to ensure they are working before proceeding with any type of work.
Note: Don’t stress the cables or bent too much. When you try to open the headlight to install them, you must be careful.
Package includes:
2X LED STRIP
Some Clips & screws
Product Features
- When the car is running , it will be white . turn yellow(Amber) when the car are turning
- Very soft to make any shape , and waterproof protection
- 23 inch(60cm)long 2 pieces it is cuttable every 3 led beads(seal the tube with insulated glue after cutting in short)
- Easy to install, there are three cables, red connect to running cable , yellow connect to turning cable , black connect to Ground line.
- Suit for DC 12V power supply, 60cm/ 23 inch length DRL strip for cars or headlights customizations.
For tailights, work!
Mounting Options Limited Although the first set I ordered were defective they quickly replaced them thru Prime. The lights function well however consider that these are silicone outside which makes them flexible but limits ways of attaching them. . The clips they supply are adequate for attaching them but the screws to attach the clips are useless, very cheap and the heads strip when using them. There are only 5 clips per strip so if you are planning on many curves there won’t be enough clips. Be prepared to use…
Comments are disabled for this post.