Introduction:
(2pcs/set)H4 CREE Hi-Lo beam LED headlight conversion kit
High power CREE LEDs,light the road forward or through the dark
Integrated fan-less design without ballast, no noise caused by fan
Throw super bright light on the road evenly at rigorous angle without dark spots/foggy light
Heat pipe technology+A380 heat sink keep the light bulb in appropriate working temperature even without cooling fan
Solid beam pattern with clear cut-off line, will not dazzle on-coming traffic
6000K white light reflect road signs and road paint better to show you clearer road situation
Invisible standard circuit design, no electronic interference
Just plug and play, no need to change stock car circuit
Technical Specification:
Plug Style: H4, Hi-Lo beam
Power(per set):40W@low beam,60W@high beam
Working Voltage: DC12V-24V
LED Quantity(each bulb): 3pcs* high power CREE LEDs
Luminous Flux(per set): approx. 4400lm@low beam,6000lm@high beam
IP65 water and dust seal, 180 degree beam angle
Color Temperature: 6500K,3000K,4300K,6500K,8000K,10000K
(The original light color is 6500K white, you can change the Kevin color film to get 3000K, 4300K, 8000K, 10000K)
Material: air craft A380 aluminum
Working Temperature: -40-80 degree Celsius
Above 30,000 hours life time
Attention:
Excellent Heat dissipation technology without cooling fan
Our headlight bulb use A380 Aluminum heat sink. Its thermal conductivity is 20000w/mk, which is 50times higher than Copper (401w/mk) and 100times higher that of aluminum (220w/mk). And the Micro heat Pipe Technology helps conduct most heat from the LED bulb to the bottom heat sink to keep the light bulb in appropriate working temperature even without cooling fan
Package Included:
2x H4 Hi-Lo LED headlight bulbs
1x English user manual
Product Features
- 2 Pcs of H4 Hi-Lo beam headlight bulbs, each with 3 pcs of high power CREE chip. Apply for headlight.
- Power: 40W (20W each bulb) @ low beam, 60W (30W each bulb) @high beam. Luminous Flux: 4400lm (2200lm each bulb) @low beam, 6000lm (3000lm each bulb)@high beam. Color Temperature: 6500K,3000K,4300K,6500K,8000K,10000K (The original light color is 6500K white, you can change the Kevin color film to get 3000K, 4300K, 8000K, 10000K)
- Working Voltage: DC12V-24V. Operating Temperature: -40-80 degree Celsius. Above 30,000 hours life time
- Heat pipe technology + A380 heat sink keep the light bulb in appropriate working temperature even without cooling fan and no noise caused by fan.
- Invisible standard circuit design, no electronic interference. Just plug and play, no need to change stock car circuit.
The actual LEDs are great, the rest is meh at best To start, the colored films don’t work. I wanted the brightness of the LEDs but the color of halogens. When I put the 3k film on it turned the light bright green. The second problem is the small locking tabs, they are about a third the size that they should be for a 9006 or 9005 (I got high and low beam lights) and it causes the light to sit crooked in the retainer unless you leave it only halfway locked. The third problem was that the actual light is aluminum but the locking ring is plastic…
There is no need to run extra wires or modules like HIDs. The lights are a lot brighter than … Auxbeam NF-03 H11 LED Kit with 2 Pcs of Bulbs 40W 4400 lm CREE LED Chips Fog Light]], I bought new fog lamps to replace the worn out ones, cause hid run so hot after some time the reflector housing turns dark grey and the light will reflect less, so even with hid you will have less light at some point. As for the led bulbs they don’t even get that warm which my reflector housing will stay new all the time. far way cooler than halogen and hid.the only downside to these is that cars have…
These headlights are a direct replacement to my stock bulbs. They are a true plug and play set. There is no need to run extra wires or modules like HIDs. The lights are a lot brighter than the stocks. What I like about this set is that it’s an all in one design, the ballast is built into the bulb. So far no flickering or distortion in my radio due to the LEDs. With these LEDs you have the option to change the lights color by placing a film over them…
Comments are disabled for this post.