Introduction:
(2pcs/set) 9006 / HB4 CREE LED headlight conversion kit
High power CREE LEDs, light the road forward or through the dark
Integrated fan-less design without ballast, no noise caused by fan
Throw super bright light on the road evenly at rigorous angle without dark spots/foggy light
Soft White light in solid beam pattern, will not dazzle on-coming traffic
6000K white light reflect road signs and road paint better to show you clearer road situation
Invisible standard circuit design, no electronic interference
Just plug and play, no need to change stock car circuit
Technical Specification:
Plug Style: 9006, Single bea m
Power:40W/set(20W/bulb)
Working Voltage: DC12V-24V
LED Quantity(each bulb): 2pcs* high power CREE LEDs
Luminous Flux: approx. 4400lm/set(2200lm/bulb)
IP65 water and dust seal, 360 degree beam angle
Material: air craft A380 aluminum
Working Temperature: -40-80 degree Celsius
Above 30,000 hours life time
Application: headlight, fog light
Attention:
Excellent Heat dissipation technology without cooling fan
Our headlight bulb use A380 Aluminum heat sink. Its thermal conductivity is 20000w/mk, which is 50times higher than Copper (401w/mk) and 100times higher that of aluminum (220w/mk). And the Micro heat Pipe Technology helps conduct most heat from the LED bulb to the bottom heat sink to keep the light bulb in appropriate working temperature even without cooling fan
Package Included:
2x 9006 / HB4 LED headlight bulbs
1x English user manual
Notice:
Due to the misprint of the packages, the specifications are different between the packages and the listing shows. Accurate specification refers to the details of the listings. Sincerely apologize for the inconvenience. If you have any questions and concerns, please feel free to contact us at any time.
Product Features
- Attention: Due to the misprint of the packages, the specifications are different between the packages and the listing shows. Accurate specification refers to the details of the listings.
- 2 Pcs of 9006 / HB4 single beam headlight bulbs, each with 2 pcs of high power CREE chips. Apply to headlight and fog light.
- Power: 40W (20W each bulb), Luminous Flux: 4400lm (2200lm each bulb), Color Temperature: 3000K,4300K,6500K,8000K,10000K. (The original light color is 6500K white, you can change the Kevin color film to get 3000K, 4300K, 8000K, 10000K)
- Working Voltage: DC12V-24V. Operating Temperature: -40 – 80 degree Celsius. Above 30,000 hours life time.
- Notice: 1. The headlight bulbs may not work for all vehicles. The known incompatible vehicles include almost all German cars. 2. Please make sure the size of the headlight bulbs fits your car. (Product size see the third image)
The actual LEDs are great, the rest is meh at best To start, the colored films don’t work. I wanted the brightness of the LEDs but the color of halogens. When I put the 3k film on it turned the light bright green. The second problem is the small locking tabs, they are about a third the size that they should be for a 9006 or 9005 (I got high and low beam lights) and it causes the light to sit crooked in the retainer unless you leave it only halfway locked. The third problem was that the actual light is aluminum but the locking ring is plastic…
Awesome H11 headlights AuxBeam NF-03 LED lights are top quality. They measure about two and a half inches from tip to base. They have an adapter cord that connects directly to your existing light bulb assembly just plug them in from there. The bulbs have a high quality housing, and the back of the housing has its on cooling fans. The bulbs have two LED on each bulb. They also came with a 4 pack of different colored lens filters. The bulbs are 4400 lumens which looks sharp. I will definitely purchase more of the bulbs…
I installed these on a stock 2004 Subaru Forester. Light output was very good. Installation was very easy. I was very happy until I turned on my fog lights and somehow that turned on the high beams on this light. The high beam indicator on the dash would light up only half brightness. I didnt understand how this could happen….again the car is fully stock and with the normal bulbs, the foglight switch would only turn on the fog lights as intended. But there is something with this bulb…
Comments are disabled for this post.