Electrical Characteristics
1.Solar panel: 0.55W
2.Li-ion battery: 3.7V 1200mAh
3.LED power: 0.2W, 5000K-5500K,12PCS, 22-24lm/PCS
4.Motion angle and distance: 120 degrees, 10ft
5.Weight:5.32ounces
6.Size: 4.9*3.8*1.9inches
7.Working mode: Automatically turn off after lighting around 30s
Product Features
1.NO DIM MODE, designed for home security and long life.
2.Integrated design of PIR motion sensor and night sensor.
3.Recharged by Sunlight and power stored for overnight lighting.
4.Over 12 hours lighting time after 8 hours charged under ideal bright sunlight.
5.Waterproof IP 64 and durable.
Two steps easy to check whether the light can work or not
1. Unlock the product, charging the light by direct sunlight around 8 hrs.
2. Cover solar panel with you hand, it can work if the solar light lit up.
Operation Instructions
1.Unlock and activate the solar light
The internal battery is locked from factory for safety shipment, so users have to use supplied Key Pin to click the “on/off” Switch Hole and unlock the battery and lighting system.
2.How to Install the device?
Please use the supplied expansion pillar-hinge and screws to mount the device on pole or wall and anywhere outside you want for lighting.
3.Charging via solar panel
Please install the unit face south and make sure the solar panel can get the good sunlight directly without any shelter or glass.
4.Night sensor function
It will auto turn on in darkness or at night,and auto turn off when in daytime or bright area.
Special Note
1.Please fully charge the device for 2 or 3 sunny days before first use.
2.Two modes: on/off. NO DIM MODE.
Package Content
4 x Baxia Solar Motion Sensor Light
4 x Expansion pillar-hinge
4 x Screw
4 x Key pin
4 x Manual
Product Features
- Easy to install: Just use the supplied Key Pin to click the “on/off” Switch Hole to unlock the battery and lighting system, then screw it on the wall by the supplied screw.
- Ultra-Bright: There are 12 powerful LEDs and the motion angle is 120 degrees which can provide excellent illumination and turn the dark space into a bright lighted space. It’s a perfect choice to be used in garden, fence, patio, deck, yard, driveway, stairs, outside wall etc.
- High Efficiency and Eco-Friendly: This light is charged by exposuring to sunlight in day for around 8 hours. Then its rechargeable 1200mAh Li-ion battery can store the power for over 12 hours working time at night.
- Night sensor and PIR motion function: It will turn on automatically in darkness or at night, and turn off automatically when in daytime or bright area. The PIR motion sensor fuction makes this light can be activated when movement is detected within 10ft.
- Waterproof and Durable: This light is waterproof and durable with solid hard plastic construction which can withstand years of usage.
Exellent 12 LED Night Lights – Waterproof Wireless Solar Motion Sensor Four days back I got this ‘BAXIA TECHNOLOGY Waterproof Wireless Solar Motion Sensor Night Lights – 12 LEDs Bright and Security for Outdoor Garden Wall’. Easy to order, very good packing and arrived as expected. When I open the package I decided to take few pictures (Attached).The Waterproof Wireless Solar Motion Sensor Night Light easy to install (just one screw). I have four 150 LED (solar) lights around my home. This is very small and new addition.I decided to add it in my…
Very Bright !! I love this product, the light is very powerful and you can leave in next to the front door or in the patio.I have left it in the back on the table in my patio to charge itself then I came the next day and realized that I have to use the pin they send you with the device to turn it on first.It’s motion detection and light detector as well so if there is light the device will turn itself offif there is no movement then it will…
5k LED motion solar light for outdoor. Received the package a few days ago, installed right away on the wall. It was extremely bright during night time. In the 2nd days to test the product, I noticed one of the LED already dead. Not happy too much for its quality. I opened the back end of the solar led light and found out the built in battery and wires weren’t great that caused the unit cannot absorb high current power.The wires is 22AWG which is a bit thin. I would expect the wires would be 18-20AWG. One more thing I…
Comments are disabled for this post.