Bonlux 180 degree beam angle LED PL Lamps GX23 Base LED CFL/Compact Fluorescent Lamp Replacement
No Ballast Required, make sure that you re-wire the fixture to bypass the ballast. Using the ballast will cause them to flicker or destroy the LED Bulb.
6W GX23 LED PL Lamp
LEDs: 28pcs high brightness 2835 SMD chips
Dimension: 167*21*31.5mm (6.57*0.83*1.24inches)
Power: 6W
Input Voltage: AC 85-265V 50-60hz
Light Color: Daylight 6000K
Lamp Base: GX23/GX23d
Lumen: 550lm (13W CFL replacment)
Beam angle: 180°
CRI≥80Ra
Package Includes:
Bonlux 6W GX23 LED PL Lamp x2
Product Features
- No Ballast Required (Remove/bypass the ballast);
- Low heat, low power consumption, energy-saving (can save up to 60%);
- Length: 167mm/ 6.57 inches (confirm correct size needed before ordering);
- 28pcs high brightness 2835 SMD, 6W Consumption, 13W Equal, 180 Degree Beam Angle, Daylight 6000K;
- For Use in Recessed/Surface-mounted Downlights, Recessed Cans, Table/Desk Lamps, Portables, Pendant Lamps, Ceiling Fixtures, Wall Washers, Wall Sconces, Family Rooms, Living Rooms, Kitchens, Dining Rooms, and Porches.
Bonlux GX23 PL 13 LED conversion lamp The Light output, is bright, as bright or brighter than the PL-13 CFL it replaced.Color Temp is on for 3000k,The construction is good, I did multiple insertion / extractions in my clunky GX basefixture with its hook locks that require force for removal and insertion. The unit does rattle a littleThe back of the light gets HOT, 144F/63C, checked with digital quick read thermometer. About 30F hotter than the CFL glass reached,The front of Bonlux light and base are warm at…
gives off a nice glow, and doesn’t heat up the way other …
Comments are disabled for this post.