Brightech’s innovative LightPRO LED Shop Light replaces inefficient fluorescent tubes and provides ultra-bright beams of cool white light over your industrial workstations, garages, repair shops, and equipment rooms. This lightweight, energy-saving overhead fixture features a pair of integrated LED lights that draw only 40 watts in total yet produce brightness comparable to 100-watt bulbs. There’s no flicker here – just an instant “on” at 4,000 Lumens with a 4,000-Kelvin color temperature that brings the intricate details on your workbench into sharp focus. You can attach 5 fixtures together if needed!
The long-lasting lights in this four-foot-length suspended fixture will burn cool for 20 years or 50,000 hours – depending on the amount of daily use. No more constantly replacing burnt-out energy-guzzling bulbs of yesterday!
LightPRO LED Shop Light can only be hung from the cables provided. Your installation kit includes mounting anchors and a pair of steel cable extensions.
Product Features
- BRIGHTER THAN SUNLIGHT: With 4,000 Lumens and a color temperature of 4,000 Kelvin, this overhead LED fixture provides abundant, dazzlingly bright white light! The frosted white lens keeps it glare-free. For indoor use only. Suspend over soldering stations, workbenches, or any area for task lighting. See the repairs you’re making with crystal clarity!
- NO FLICKERING: Instantly on at full brightness, these LED tubes are superior to fluorescent lights in every way. They don’t flicker, they don’t produce heat, and they will save you a bundle on your electricity bills! LightPRO lasts for 50,000 hours or 20 years depending on your daily usage. Draws only 40 watts while beaming the equivalent of 100-watt traditional overheads. The integrated LED lights are NOT removable.
- INCLUDES INSTALLATION KIT: Your box will come with two steel suspension cables with anchors to attach them to the light via loops on the ends. Install 6 feet above (or higher) where you need the light. Pull chain for easy on/off. Note: fixtures are not designed for end-to-end wiring. These standalone 4-foot-long units cannot be daisy-chained together in a continuous strip. And best of all, you can attach up to 5 fixtures together to cover more ground.
- THE MEASUREMENTS: LightPRO LED Shop Light weighs 4 pounds and has a height of six inches (including the hangar). The 65-inch cord has a diameter of less than ¾ inch and has a 2-prong plug for 120V to 277V outlets. 80 CRI (color rendering index), not dimmable, and operates in extremes of cold and hot weather alike with a temperature range of -22°F to 130°F. Provides complete coverage for 6 x 2.5′ benches.
- THE WARRANTY: All Brightech LED lights have a 3-year warranty. If for any reason you are not satisfied with your purchase, please contact us. Our industry-leading commitment to you will make things right!
Very bright and very easy to install. I installed the roof brackets a little closer together than the instructions said so that wit would help pull the clips that go in the light together a bit more, because it seems they could come out fairly easy. The only other thing I didn’t really like was that the power cord and the cable to turn the light on were on the same side of the light. Where I installed the light, there is a shelf under one side and the outlet was next to that shelf. If I…
This light is perfect for my needs! I have it mounted below an overhead shelf that is over my work bench, so it’s not as far away as if I mounted it on the ceiling. IF I was to mount it to the ceiling, it probably would not be enough light unless you used the drop down cables to get it low enough. I knew that going in, and if I were to mount it to the ceiling I would get something a little bigger/brighter. But overall, it’s perfect for what I wanted, and it was priced nicely. It’s instant on…
Comments are disabled for this post.