Car Door Safety Reflector LED Light is designed easy D.I.Y. Kit to stick on car doors. Car LED door warning lights is designed to prevent the Rear-END collision in the condition of easy installation.This warning lights fitted to universal vehicle drivers to convey the provide additional warning of a hazard when stationary to passerby, motorcyclist or other Drivers.The light is slim and it can be installed onto almost all car’s door without interference. The light is powered by CR2032 flat button battery and Switch on/off by efficient proximity magnetic switch. A single light comprises of 3 led chips, the light is programed into three warning styles for best effect for warning rear approaching vehicle: LED Size: Diameter 1.12″ x Thick 0.35″ Package Includes: 2x LED Lights, 2x Magnets & 2x Batteries (CR2032) Installation Tips 1. Heating, Increase Viscosity (don’t too close) 2. Press 5 seconds at least 3. Install it in the position does not affect closing the door

Product Features

  • 1.Wireless design , do not destroy the original car line, just paste the way to DIY can be warning
  • 2.Waterproof design, high-tech component sensing, superior endurance, standby time up to 3 years
  • 3.Product use CR2032 button battery, screw cap design, can replace the battery
  • 4.When the door is turned on, the red light flashes rapidly, warning the rear to the car, to avoid the dim light when the accident occurred and chase;Products are divided into three warnings, the first 6 seconds “rapid flash” mode, in order to achieve the best warning to the rear of the car
  • 5.Light 110 seconds after the automatic power failure, then the warning light can be passive “reflection” light to remind the rear

Share Button

Related Posts

Sovrn