LED Lighting Distributors

◊Features:

• PVC Rubber Material, flexible, waterproof, anti-collision, anti-corrosion
• Remote Control 8 Color RGB Car LED interior under dash lighting kit
• Sound Sensitive Function, enjoy color changing according to music rhythm
• 8 Monochrome Modes: Red, Green, Blue, White, Orange, Yellow, Cyan, Purple, and Brightness Control
• 4 Automatic Change Modes: 2 jump mode control(Jump 3& Jump7), 2 fade mode control(Fade 3& Fade 7）
• 4 Music Sensor Modes
• 4 sound-activated color changing modes
• Remote control distance up to 6.5ft
• Numbers of LED: 60 (15 x4)
• LED type: 5050 SMD

◊ Advantage

• :With sound effects; high impact strength; flexible and compact size; low power consumption; high brightness and so on.
• Easy to install with a good pressure-sensitive adhesive, can be installed outside the car or internal car.
• Installation location: can be installed in the bumper, intake grille, cabin, rear car, the car and so on.

◊Specification:

• Material: High quality PVC Rubber
• Light Color: RGB
• LED type: 5050 SMD
• Certification: CE/FCC
• Light Bar:27*1.3*0.7cm(10.63*0.51*0.28inch)

◊NOTE:

• 1. Please note the direction when connecting the strip light to the car charger
• 2. The remote should point to the box with the receiver.
• 3. Please remove the battery cover before using the remote.
• 4. The sensor has to be put on or near the speaker .
• 5. The surface should be clean before using the 3m sticker.

◊Package content:

• 1 x Car neon light kit(4 light strips)
• 1 x Remote
• 1 x Car charger
• 1 x IR control box

Product Features

• ✔Material & Specification-High quality PVC Rubber; Flexible, UV & Water Resistant; Can be easily installed interior, glove box lights, under the seat;Voltage: DC 12V; Wattage: 10W; Bulb Quantity: 4pcs 60 LEDs, 15 LED/ Light; Light Color: RGB; LED type: 5050 SMD.
• ✔How to use – ;1)Pls remove the battery cover before using the remote control; 2)The remote control should point directly to the remote receiving line;3) If you want to turn ON/OFF the light, just press the ON/OFF buttons on the remote control.
• ✔Design – Flexible, UV & Water Resistant, Ultra Thin, High quality Music LED Strip Light, can be easily installed in the gap and virtually invisible
• ✔Installation method – 1)Just assemble the strip light, 2) peel the back 3M double-sided tape and apply it underneath the headlights or under the bumper,3) directly inserted in cigarette lighter.
• ✔Instructions – Remote control enable you to switch the led mode and adjust the brightness as you wish, 2 modes with the item 1) Wireless control, the remote control should point directly to the remote receiving line; 2) The Intelligent voice control, The light could flash rhythmically under the loud and dynamic music.