Please note this LED bi-pin bulb can be powered by both AC and DC12V circuit.
It can be widely used in interior design for creating decorative lighting.
It uses the powerful 1pcs cooper bracket and gold-line packaging Epistar COB LED to emit the comfortable lighting.
It’s a cost-saving item to run with only 1W of power for up to 100 lumens.
Product Features
- ☀G4 1W LED bulb replaces your standard 10W T3 halogen bulb.Note:Since most applications use old dimmer which doesn’t work well for LED bulbs, this G4 LED bulb may flicker at maximum dimming/ lower-setting.
- ☀Low power consumption. Using 1 watts for up to 100 lumens of brightness
- ☀Branded Epistar Sapphire COB LED chips. with high color rendering index
- ☀High-quality Silicone materials. higher light luminous efficacy, better heat dissipation.
- ☀Wide range of application.suitable for interior lighting, signal lights, lamps and fixtures of any style in living room, bedroom, kitchen.ect
Review for 4 watt version – Good light, dims ok, equivalence to 30 watt halogen These came in a reasonable time and installed easily. They are slightly larger/longer, however it is not a major problem for most fitments. The LED light elements are on both sides of the silicon incased unit. The nice thing about them is that they operate much cooler than halogen bulbs, also the light quality is good and warm, although unlike halogen bulbs which as you reduce the voltage become even “warmer” in color, these LEDs remain about the same colour as they dim. These bulbs are…
Almost perfect I have some halogen puck-style under cabinet lights I installed in the kitchen years ago, which are inset into the wood of the cabinet. These get very hot and after many years I’ve noticed the wood was starting to dry out and discolor around the lights. I’ve been looking for an LED retrofit solution for the past year or so.First I bought some 2W COB style G4 LEDs which were like these, but these were far too dim for a kitchen application. I then went big and bought some 5W multi-LED…
These lights were exactly what I was looking for and they met all my needs and expectations. BEWARE: These LEDs may flicker at about 30 Hz when installed in less than ideal electrical situations. The fact is most low-voltage LEDs have a tendancy to flicker unless their electrical resistance is controlled. I used four of these bulbs to replace four halogen lamps in my kitchen under cabinet “puck” lights. Within 15 minutes, all four were flickering wildly. The culprit wasn’t the…
Comments are disabled for this post.