This 120V 40W color-changing LED pool light with remote, is specifically designed to replace incandescent or halogen bulbs in swimming pool underwater light fixture, such as Pentair Amerlite 784 Series, Hayward Astrolite SP058 Series. The color lamp has 16 different color modes: 7 fixed colors, 9 light shows. 7 fixed colors include: red, green, blue, yellow, cyan, purple, white.
Remote Control + Switch Control
Press the button in remote controller to directly select the color you want. Color-changing also can be controlled using an ON/OFF switch. Turn the switch off/on to select one color mode.
Color Memory
When the lamp is turned off, the last color mode will be saved. Next time the lamp is turned on, the previously saved color mode will be displayed.
Specification:
- Voltage: 120 VAC
- Wattage: 40 Watt
- Base: Medium Base (E27)
- Diameter: 6-5/8 inches; Length: 5-3/8 inches
- Weight: 1 lb.
- Certificate: FCC, CE, RoHS
- Warranty:2 Years
Includes:
- 1× Color-changing LED pool light
- 1× Remote Controller (Battery type: 23A12V, not include)
- 1× User Guide
Tips for using remote
Water depth will affect signal, using remote should be near the pool light. If you don’ t like it, we offer the following products.
Switch Control Color-changing LED Pool Light
Simply use an ON/OFF switch to control color, such as a wall switch. Link: http://www.amazon.com/dp/B0738284MN
330ft Long Range Remote Switch
Remotely controls the on/off of pool lights. You can control color-changing in bedroom, kitchen or somewhere far away from pool. Link: https://www.amazon.com/dp/B073Y792J8
Product Features
- The brightness of RGB is up to 2x brighter than other cheaper bulb. Specifically designed to replace incandescent bulbs in swimming pool underwater light fixture, such as Pentair Amerlite 784 Series, Hayward Astrolite SP058 Series.
- Remote control color. Press the button in remote controller to directly select the color you want.
- Multiple lamps can be synchronized to change color. Color Memory. 16 color mode: 7 brilliant fixed colors, 9 dazzling light shows.
- Automatic thermal switch for added safety.
- Simple “plug-and-play” replacement. Simply unscrew your incandescent bulb and install the “screw-in ” LED lamp with Medium base (E27).
Work well, very reasonable price. Bought 2 of these to liven up my pool. I was concerned how well (or if) they would work at the price, but they’ve been great! You can replace a lot of these for the $3 grand cost of a hard wired installed system from a major pool equipment manufacturer.Pull out the old bulb, install this bulb (with a new seal, please), reinstall and your done!Remote does need to be close—I actually stand over the bulb and dip the remote antenna into the water and that never fails. Also easy to…
I had a 19W bulb in before and this one is definitely better. The remote actually works
Remote Control Doesnât Work
Comments are disabled for this post.