This Intocircuit LED power supply drive is a reliable power source for LED strips and any other devices with power less than 60W and running voltage at 12V (DC).
it’s energy efficient which give it another power to run constantly and barely heats up. Its most remarkable merit is Over-load operating, which means it can operate over 60W, but do NOT worry, it’s Over-pressure protection and Over-heat protection chipset can protect it from burning out.
Input Voltage: 100-240 Volts AC 50/60Hz
Output Voltage: 12V DC
Output Current, Full Load: 5A
Output Power: 60W
Certification: CE,UL,CB , FCC,ROHS
Operating Temperatures: -40 ~ +55degree
Dimensions (LxWxH): 114mm x 45mm x 30mm
Product Features
- Power 60 Watt, Input Voltage 100 -240 Volt£¬Output Voltage 12V DC 5000mA, Class 2 Power Supply
- Ultra-small size£»Length 114mm/Width 45mm/Height 30mm
- Easy to install, mount, and wire
- Built-in intelligent chipset,anti-thunder,with circuit protection function£¨short circuit,overcurrent,vervoltageoverload£©
- Suitable for LED lighting and moving sign applications
This product works great. Measured output is 12 Worked as expected. I hooked numerous rows of LED lights to this thing. I didn’t do the math on 60watts, but it powers the LED’s no problem.I personally hooked this up, so that the transformer is always powered and the low voltage is switched.It does take a second or two to heat up then power the lights. Since I have this wired into a door switch for a closet/pantry, there needs to be instant light. The 1-2s delay was annoying as heck. Who knows how much power that’s…
I like the screw connection terminals for AC Power and DC …
Comments are disabled for this post.