){kind=link}
55 pounds magnetic strength base will be holded so strongly to automobile metal surfaces ,so lights never fell off during working
Wire distance between lights is 7ft ，Wire harness length is 20ft enough with 4 standard pin connectors
Super bright LED with 100,000 hours life and Complies with DOT standards
Scratch resistant magnetic base for easy Mount！Each kit have assembly and opearating Instructions for easy installing
Ideal for towing applications up to 80″ wide like Trailer,Boat,Truck,RV,Dollys,etc
Operation:
1.Set the lights on the back of the vehicle being towed
2.Set the lights so that the red side of each light faces backwards
3.Set the light which corresponds to the green wire on the right side
Set the light which is attached to the yellow wire on the left side
The Towing lights are now ready to be activated as you use the brakes and turn signals of the towing vehicle
Product Features
- 55 pounds magnetic strength base will be holded so strongly to automobile metal surfaces ,so lights never fell off during working
- Wire distance between lights is 7ft ，Wire harness length is 20ft enough with 4 standard pin connectors
- Super bright LED with 100,000 hours life and Complies with DOT standards
- Scratch resistant magnetic base for easy Mount！Each kit have assembly and opearating Instructions for easy installing
- Ideal for towing applications up to 80″ wide like Trailer,Boat,Truck,RV,Dollys,etc
Related Posts
Auxbeam F-S4 Series 9006 Headlight Bulbs with 2 Pcs LED Headlight Conversion Kit of 60W CREE LED Chips Fog Light – 1 Year Warranty Introduction: (2pcs/set) 9006 CREE […] Posted in LED Headlights
Pack of 4 | 4 ft LED Tube Lights 18W (60W Equivalent) 2100LM 5000K Clear Dual Ended T8 | Works with and without T8 ballast | Eco-Friendly | Fluorescent Replacement Lighting Fixtures LED Channel SIgn's T8 Tube Light is […] Posted in Sign Lights
5 Big Amber Chrome Torpedo LED Cab Marker Light Roof Top Clearance Assembly Peterbilt Kenworth Paccar Freightliner Semi Truck Roof Top Cab Lights. These premium, […] Posted in LED Marker Lights
Simple solution to non-working tow dolly lights The built-in lights on our Master Tow dolly have connectors that pop apart very easily. Purchased this set for a more durable solution, and they turned out to be just that. After a three months 4350 mile trip, with many disconnects/reconnects, bumps/bounces, and wire mishaps, they returned home patched and still working. There was never an issue with the magnets failing to hold. It is key however to think through the wire routing to protect the finish on the vehicle if you care. It takes…
make sure they are hooked on good
Comments are disabled for this post.