Please make sure the size meets your needs before you place order.
Look at our little reading light with frosted glass lampshade. It has small body to fit the narrow places. But you don’t have to worry about the brightness would be low. Its luminous flux is 120 lumens which is bright enough for reading! The classic frosted glass lampshade not only is a beautiful decor, but also optimizes the lighting distribution. Equipped advanced LEDs, our 12V reading lights are efficient illumination at low power consumption at 2 watts. This little light equipped an On/Off switch for your easy control. To fit a moving environment (vehicles), the light is vibration-proof by solid holder and mature workmanship. Just by wiring and screwing, the installation is easy thanks to the surface mount design.
Specifications:
Operating Voltage: 12V DC
Low Power Consumption: 0.15A, 2 watts
Lighting color: Cool White
Luminous Flux: 120 lumens
Lighting Angle: Adjustable
Height: 4.1 inch, Base Diameter: 2.3 inch (Please refer to the picture with dimensions)
Features
A. Brushed stainless housing holder with frosted glass lampshade
B. Vibration-proof design is ideal for moving vehicles.
C. Lighting direction adjustable.
D. Finest LED chips not only has stable performance, but also are energy-saving.
E. Perfect for reading, caused no eyestrain.
F. Equipped an On/Off Switch.
G. Easy installation by the surface mount design.
Installation
1. Mark the location on a surface where you want to mount your light.
2. Turn off the electricity. Connect the black wire to the positive and the white wire to the negative.
3. Mount the light with screws and fix it well.
4. Turn on the electricity.
Product Features
- Suitable for interior lighting for RV,camper trailer, caravan, marine or yacht.
- Swivel joint allows for different lighting directions for your convenience.
- Super bright LED and frosted lampshade provide soft light without glare.
- Good heat dissipation to ensure a long lifespan.
- For the product detailed dimensions, please refer to the picture on the left.
… would say between the wife and I we do love this item So I would say between the wife and I we do love this item. Quality of production is very good, feels like something you would find in a new Island Packet or (if it were a car) Mercedes. Light output is OK, bulb is built in. Light dissipates after 8′ so long throws are no good but it’s not built for that. On the bench they consume .84W per light. On the boat 3 are used as replacement 80’s brass reading lamps and an addition work light in the galley. Boat is an 1988 Hunter 30-2 (G Series)…
Very nice looking, but be aware they are never really off and have a slight parasitic draw. These are nice looking lights and the functionality of both a reading light and night light is interesting, but something to think about is that these are never really off. Since the control is not just a physical switch and include a microchip they draw power when “off”. I read 0.01 amps draw in the off position. This isn’t much so they may or may not be ok for your application. I bought these for a van conversion and will look for something else for that project. I don’t want any…
Easy to install
Comments are disabled for this post.