Specifications:
LED type: SMD 5050
Length: 32.8FT (10M)
LED Quantity: 300LEDs / 32.8FT
Color: RGB
Beam angle: 120 degrees
Input voltage: 12V DC
Working Temperature: -20℃ to 50℃
Storage temperature: -40℃~ +80℃
Protection Rate: Non Waterproof
Can be cut 3 LEDs per Unit
Package Contents:
2* 16.4ft/5 meters led strip lights
1*44 key remote controller
1*IR control box
1*power supply
Product Features
- REMOTE CONTROL MODE : You can DIY the colors you want with 44-key remote controller,press “DIY” button and then just long press one of the arrow buttons to set it up .Also it have dimming and brightness control, which is Extremely suitable for indoor and outdoor lighting . Such as kitchens, cabinets, restaurants, bedrooms, gardens, courtyards, balconies, banquets, weddings, etc..
- HOW TO USE IT? Connect the load and power lines, make sure all connection right before power switched on,and no obstacle between the IR controller and the receiver when operating,please take off the plastic sheet of remotes battery before using and insert it after using it.
- BRIGHT AND COLORFUL : Super-bright 300 Leds but running with low temperature,the operating voltage is 12V,and there are 16 kinds of colors to choose and create the splendid atmosphere. Please note this is non-waterproof version.
- CUTTABLE AND LINKABLE : Color changing LED Strip Lights can be cut each 3 LED along the cutting mark without damaging the rest of the strip. its adhesive tape backing can be fit many dry clean flat surface and not easy to fall off.
- WARRANTY RELATED: 30 days money back guarantee,reply within 24 hours.If your product is has a manufacturer defect. Just click GET HELP WITH ORDER under your order ID. Our customer service team would be more than happy to assist you fix the issue.
Beautiful Customizable Lights I plugged these lights in and they immediately got way hot, burned up inside the roll in less than 60 seconds of testing. The other half burned up and i missed it as the were behind me, something is definitely wrong, was totally missing or backwards. I had the Adapter taped to the back off wood on a painting, a very expensive painting and the solder from the strips burned a hole in the canvas and burned both me and a buddies hands. Not only would i not recommend these, i warn anyone, if you…
Comments are disabled for this post.