Voltage: DC 12V 10A
Wattage: 30W
8 solid LED lights Color: Red, Green, Blue, White, Orange, Yellow, Cyan, Purple
8 Modes: 4 color changing modes and 4 sound-activated color changing modes
Remote control distance up to 6.5ft
Numbers of LED: 72 (18 x4)
LED type: 5050 SMD
LED Light Length: 12″ (30cm); Width: 0.47″ (1.2cm)
Strip light Cable Length: 57 inch (147cm)
Car Charger Cable Length: 78 inch (200cm)
Material: High quality PVC Rubber
Note:
1. Please note the direction when connecting the strip light to the car charger.
2. The remote should point to the box with the receiver.
3. Please remove the battery cover before using the remote.
4.The sensor has to be put on or near the speaker.
5. Packaged with Heat Shrink Tubing to fix the connection between the strip light and black box. It is better to use with the hot wind such as Hair dryer or something to carry out the fix, be careful when using the fire to fix the connection
Product Features
- Easy to use. Just assemble the strip light first, then peel the back 3M double-sided tape and apply it underneath the headlights or under the bumper. It’s that simple!
- 72 Ultra-Bright LEDs with 18 Wide Angle LEDs per Tube
- Remote control enable you to switch the led mode and adjust the brightness as you wish, also sound-activated allows you enjoy the fun with the color changing following your car stereo music rhythm as well as your voice
- Great product to dress up your car, perfect enhancement not only for upgrading your car but also increase safety of driving in daytime and nighttime
- One Year Warranty & Free Technical Support
These are bright multi-color LED; Great interior lighting solution This GD lighting 4pcs Multi-color LED interior lights works as it was described by the seller. It is well constructed and it has adhesive 3M on the back of the LED strip for easy installation. The LED strip has this long cord which measures about 42 inches length .These are bright LED’s and came with sound activated RF control and remote which you can change it to R,G,B,W,O,Y,C,P colors using the remote and on top of that you can select 8…
Cool lights, different colors, can follow ambient music/sound and pulse to the beat This set comes with 4 strips of the LED lights, 4 heat shrink cable wraps, a 4-way power splitter, an IR controller, a power adapter, and a remote control. There is a very brief instruction card which describes (poorly) the functions of the buttons on the remote. There’s a bit of assembly required, and though there are no instructions, it is pretty straight forward.Assembly:Connect each LED strip power cable to the 4-way splitter…
Comments are disabled for this post.