GetInLight IN-0210 Series Under Cabinet Lighting Fixture with low profile design and aluminum housing. Features a temperature slide switch allowing selection among 3 color levels: Warm White (2700K), Soft White (3000K) & Bright White (4000K). Rated lifespan 50,000 hrs. 90 CRI. Dimmable using a standard dimmer. Linkable up to 20 units.
Plug-in installations:
Attached to the cabinet with 2 captive mounting screws, and wire the power cord (included) to main supply.
Optional power cord available in 3 ft. (PC1-36-WH, PC1-36-BK)
Hardwire installations:
This Fixture can be direct wired (all accessories included), knockouts spaced every 4″ on top and back offer maximum wiring flexibility.
This Kit Includes:
3 color LED Undercabinet Fixture
6′ cord and plug
6″ connecting cable
Hardwire Connection Kit.
Certification
Approved by ETL Standards for Canada and USA.
QUALITY GUARANTEE
We guarantee the quality of all GetInLight products. If this product does not perform properly, please contact us.
Product Features
- Features a Temperature Slide Switch, allowing selection among 3 color levels, Warm White (2700K), Soft White (3000K) & Bright White (4000K)
- Aluminum Housing with Easy Access Knock-outs and Polycarbonate Diffuser
- Hardwired or Plugged-In installations available, hardware kit and cords included in package for both methods.
- Link up to 20 units to a single power supply, ETL Listed, Energy Star, Lighting Facts Labeled, Energy Star Certified
- Dimmable with Most Wall/Box Dimmers, Hi/Low Switch for Non-dimming Applications. Dimmers that have been tested with this fixture: GE 18023, Lutron Diva DVCL-153P, Lutron Maestro MACL-153M, Lutron Caseta PD-6WCL, Lutron Skylark SLV-600P, Lutron AYCL-253P
Best undercabinet LSD lights on Amazon, and best customer service. I like the fact it is easily mountable w/o taking it apart (2 screws go all the way through the fully-assembled unit) and it can be direct-wired and mounted nearly flush against the back wall. Also the light is nicely diffuse–you can’t see individual LED cells. Exterior build-quality is also good with no rough edges or paint runs. I also like the fact the hole in the back for direct wiring is in the middle of the unit, so you can prewire the wall for the wire to come out in the middle of…
Great light – some installation kinks I bought one of these because of the hardwire install capabilities to switch out some under cabinet kitchen fluorescent tubes.Initially I bought one to try it out. No point in buying all initially – in case I have to return them.Based on the install I did the pros of this light are:* light looks very nice and is slim.* plenty of knockouts – accommodates pretty much any power feed locations.* easy testing – just take it out of the box and use the…
Chose this over the Swivel version – better lighting options than the swivel version and very simple to mount Very easy to install. Two screws that mount vertically through the unit. Was so easy – this is a 24 inch model, so had a space of 32 inches to install it in so ( 32 – 24 = 8, and 8/2 = 4) so just measured 4 inches from the edge and it was perfectly centered above my sink. Then just hand screwed the screws in to secure it and lock it down. I chose to hardwire the unit in using and electrical cord which plugs into a socket above my microwave. Was able to do the wiring with drilling just one…
Comments are disabled for this post.