GetInLight IN-2010 Series LED Under Cabinet Lighting Fixture features a temper switch allowing selection of 1 of 3 color levels, Warm White (2700K), Soft White (3000K) & Bright White (4000K). Can be attached to the cabinet with 2 captive mounting screws, which provides a smoother installation.
Construction
- Housing is a slim 1″ profile made of extruded aluminum
- Knockouts spaced every 4″ on top and back offer maximum wiring flexibility
- Built in driver, no transformer or adapter required
- Integrated LEDs built in, no need to replace
- 3 position switches allows you to choose full brightness, 50% of full brightness or off
Electrical
- 2 LED arrays are used to create 2700K, 3000K or 4000K color temps
- Produce 1100 Lumens light while only using 16-Watt of electricity
- Utilizes high performing LEDs with greater than 90 CRI
- Dimmable to 10% with most standard dimmers
- Lifetime rated for greater than 50,000 hours
Optical System
White polycarbonate diffuser eliminates hot spots creating a pleasantly uniform light distribution
Finish
Matte White
Installations
Plug-in or Hardwire installation
Optional junction box (IN-0501-2) is available for use to create a paddle-switch under cabinetry
Optional linking cord available in 12″ (JC1-12-WH), 24″ (JC1-24-WH), 32″ (JC1-32-WH) and 60″ (JC1-60-WH)
Listing
cETLus listed for dry location
This Kit Includes
(1) LED Under Cabinet Lighting Fixture
(1) 6 ft. cord and plug
(1) 6 in. linking cord
(1) End-to-End connector
(1) Romex connector
(2) Wood screws
(1) Installation instructions
Warranty
5-year limited system warranty standard
We guarantee the quality of all GetInLight products. If this product does not perform properly, please contact us.
Product Features
- Features a Temper Switch Allowing Selection of 1 of 3 color levels, Warm White (2700K), Soft White (3000K) & Bright White (4000K)
- Aluminum Housing with Easy Access Knock-outs and Polycarbonate Diffuser
- Hardwired or Plugged-In installation
- Link up to 15 units to a single power supply
- Dimmable with Most Wall/Box Dimmers, Hi/Low Switch for Non-dimming Applications. Dimmers that have been tested with this fixture: LUTRON-DV-603PG, LUTRON-DVCL-153P, LUTRON-DV-600P, LUTRON-DVLV-600P, LUTRON MACL-153M, LEVITON-6611-P0W
Best undercabinet LSD lights on Amazon, and best customer service. I like the fact it is easily mountable w/o taking it apart (2 screws go all the way through the fully-assembled unit) and it can be direct-wired and mounted nearly flush against the back wall. Also the light is nicely diffuse–you can’t see individual LED cells. Exterior build-quality is also good with no rough edges or paint runs. I also like the fact the hole in the back for direct wiring is in the middle of the unit, so you can prewire the wall for the wire to come out in the middle of…
Chose this over the Swivel version – better lighting options than the swivel version and very simple to mount Very easy to install. Two screws that mount vertically through the unit. Was so easy – this is a 24 inch model, so had a space of 32 inches to install it in so ( 32 – 24 = 8, and 8/2 = 4) so just measured 4 inches from the edge and it was perfectly centered above my sink. Then just hand screwed the screws in to secure it and lock it down. I chose to hardwire the unit in using and electrical cord which plugs into a socket above my microwave. Was able to do the wiring with drilling just one…
Great but expensive This replaced an under-cabinet florescent fixture. I was getting tired of replacing the florescent bulb every year or so. Someone noted in an earlier review that they couldn’t change the color or the brightness – both worked fine for me. But even at the lowest brightness setting, it is a LOT brighter than the florescent fixture it replaced.I knocked the unit down a star for two reasons: the expense – this is a very expensive fixture, and because the unit did not include any sort of…
Comments are disabled for this post.