GetInLight IN-0201 series under cabinet lighting fixture features a edge illuminated technology that provides even light without the common LED spots on the counter. Perfect for highly reflective surfaces such as stainless steel and polished stone. Can be attached to the cabinet with 2 captive mounting screws, which provides a smoother installation.
Construction
- Housing is a slim 1-Inch profile made of extruded aluminum
- Knockouts spaced every 4″ on top and back offer maximum wiring flexibility
- Built in driver, no transformer or adapter required
- End caps which molded from high impact plastic
Electrical
- Produce 300 Lumens soft white (3000K) light while only using 5-Watt of electricity
- Utilizes high performing LEDs with greater than 90 CRI
- Dimmable with most wall/box dimmers
- Dimmable to 10% with most standard dimmers
- Lifetime rated for greater than 50,000 hours
Optical System
White polycarbonate diffuser
Finish
Exterior white powder coat finish
Installations
Plug-in or Hardwire installation
Optional linking cord available in 12″ (JC1-12-WH), 24″ (JC1-24-WH), 32″ (JC1-32-WH) and 60″ (JC1-60-WH)
Optional GetInLight junction box (IN-0501-2 / ASIN: B01D4ICHNC) is available for use to create a paddle-switch under cabinetry.
Listing
cETLus listed for dry location
This Kit Includes
(1) LED Under Cabinet Lighting Fixture
(1) 6′ cord and plug
(1) 6″ linking cord
(1) End-to-end connector
(1) Romex connector
(2) Wood screws
(1) Installation instructions
Warranty
5-year limited system warranty standard
We guarantee the quality of all GetInLight products. If this product does not perform properly, please contact us.
Product Features
- Edge lit technology eliminates hot spots, perfect for highly reflective surfaces such as stainless steel and polished stone
- High end metal construction with easy access knock-outs and matte white polycarbonate diffuser
- Hassle-Free Installation & Maintenance, Hardwired or Plugged-In installation options
- Link up to 20 units to a single power supply
- Dimmable with most wall/box dimmers
If you’re going to hardwire this fixture, read on… These light fixtures are generally well made and do the job, but I do have some quibbles:1) If you are going to hardwire these, understand that the knockouts have two tabs and are not easily removed. When I read the instructions to remove the knockouts while the plate was still attached to the fixture, I couldn’t believe it. The force required would probably damage the unit. Look at the diagram and you’ll see what I mean. Instead, I removed the panel and carefully worked on the…
nice warm white light fixture This light arrives well packaged in a retail box. There are easy to read instructions included with the light.The light measure 12″ in length and can be hard wired in to your existing electrical with the included romex connection kit or it can be used with the included power cord. The included power cord measures 6 foot long and is made of heavy gauge wire. With this light you can also link two or more of them together and even use them on a dimmer.The light has a switch with…
Highly Recommended After placing our order we received this light in a very timely manner. The light was exactly as described and was easy to install. In fact, we had a problem with lost installation directions after unpacking the light. An emailed request to InLight’s customer service resulted in a rapid response and replacement instructions.The light itself is very good looking and gives off a very nice white light. Whereas our xenon lights from an InLight competitor give off significant heat…
Comments are disabled for this post.