Ampper LED headlight bulbs, ARC BEAM 80 W 8,000 lumen 6 K cool white CREE chips, all in one conversion Kit for car headlight replace.
Compatible & Application:
1, Design for most motor vehicle with 9-36V power input.
2, German brand cars are NOT SUITABLE.
3, This item may not suitable for some of car models, such as Dodge (most of dodge models need to be decoded), Jeep Cherokee, Jeep Patriot, Toyota Coaster, Toyota Stenna, Toyota Tundra 2012, 2014 Chevrolet Silverado.
4, Caution: If your headlight (mostly high beam) is also used as DRL (daytime running lights), pls test the voltage of DRL before purchase it. Because this item’s working voltage is 9-36 V, and the DRL run at 6-9 V normally, may caused the flickering for DRL. If you confirm that your DRL output voltage is above 9 V, you could choose this item definitely.
KINDLY PLEASE NOTE:
1, We strongly recommend physically checking your light housing or check the vehicles owners manual to see which bulb size the lights use for your particular trim package.
2, Please notice this is the white light (cool white).
3, Please confirm with the detail page carefully before ordering to insure a proper fit.
4, Disconnect battery before performing installation.
5, Ensure you have adequate clearance behind the bulb for cooling fan / heatsink that protrudes about 1.5 inch (pls check with fifth image for the type you want) from the back of the bulb.
6. Do not press the chips.
Complete All-in-One Conversion Kit Includes:
1, 2 LED headlight bulbs.
2, 2 Drive for working.
3, 2 Connector for Plug & Play.
4, 1 Manual.
100% Satisfaction Guarantee.
No reason for return or change.
Worry-free Ampper’s 1 years warranty.
Order it now!
Product Features
- Compatible & Application: design for most motor vehicle with 9-36V (DRL running at 6-9V normally) power input (for most of cars, offroad and motorcycles). PLEASE NOTE German brand cars and Dodge are NOT SUITABLE, pls check the car models with the product description below.
- Superbright & Safe: 2 CREE XML chips every lamp with Arc-Beam technology and without dark spots, 20 W / 2000 LM every chips, 80 W / 8000 LM totally (cool white). All-in-one complete kit for replacement of your halogen headlight, no harmful and hurt for other drivers when pass them or crossing.
- Excellent heat dissipation & Plug – Play: efficient aluminum radiating fins and built-in cooling fans, over 50,000 hrs of brilliant continuous light. Easy to install within 20 mins like OEM parts, simple and quick installation.
- Energy-saving & Weatherproof: lower power consumption and higher energy conservation. Works underwater, IP67 waterproof guarantees housing / heat dissipation works even in extreme situations.
- Instant-on capability for “zero warm-up time”. 100% SATISFACTION GUARANTEE: no reason for return or change, worry-free Ampper’s 1 years warranty.
Did not last long at all. **EDIT** These worked really well for about a month, then one burned out, and the other seems like it’s about to do the same thing. They’re really great when they work. If at all possible, I would really like a refund, and would like to send the other headlight that works, back. These are 44W, and I have 55W sockets, so that shouldn’t be a problem at all! It would be a problem if it was the other way around.EDIT: The one light bulb turned out to be defective. Customer service was absolutely…
Built Well. Very Bright and Even Light. Construction – The first thing I noticed was how well made these bulbs are. They are metal construction from the wide base to the narrow LED mount. Unlike typical bulbs with the socket at the bottom, these have the socket on a wire that connects to a square metal electronic board and then connects to the bulb. This leaves the socket and the circuit hanging below the bulb by its wire. This is the only thing I don’t like about these bulbs. But it does dissipate the heat more efficiently…
Comments are disabled for this post.