Specification:
1. Light Type: H11/H8/H9 LED
2. Certification: CE. Rohs
3. LED Type : CSP LED Chips
4. Input Power: L/30W, H/30W
5. Working Voltage: 12-24V
6. Waterproof Rate: IP68
7. Beam Angle : 360°
8. Installation: Plug and Play
9. Color Temperature: 6000K (Xenon White)
10. Luminous Flux: 6000LM x 2 / Total 12,000LM
11. Life Span: Up to 50,000 Hours
12. Operating Temperature: -40℃ to +80℃
13. Cooling Method: High Speed Cooling System + Forced Cooling
Package Included:
2x H11 LED Headlight Bulb, CAR ROVER 60W 12000Lumens Extremely Bright 6000K H8 H9 CSP Chips Conversion Kit
Product Features
- EXTREMELY BRIGHT: CSP H11 LED headlight bulbs with 60W per pair. Cold White 6000K. High luminous efficacy Flux up to 12000LM per pair. 300% brighter than your stock halogen headlights. PERFECT BEAM PATTERN without dark spots or shadowed areas, don’t dazzle oncoming traffic, No glare to other drivers.
- ADJUSTABLE MOUNTING DESIGN: Besides the ultra-high brightness, this H11 LED headlight can be 360 degree adjusted and comes with removable adapter, you can easily mount this car LED headlight bulbs in the reflector or projector headlight.
- STRONG HEAT DISSIPATION: The H11 LED bulb was built-in cooling fan and made of aviation aluminum lamp body, which keep the light get a better protection and performance in heat dissipation. In addition, can extend the lifespan of the LED headlight bulbs up to 50,000 hours.
- 1:1 RATIO DESIGN: 1:1 halogen filament design, apply the same length and position as the halogen bulb, produce the same light focus. Bring you the perfect light shape and distance, the light brightness as well. IP68 water resistant and designed for use in heavy rains, rainproof housing and fan, can work even in extreme situations.
- EASY TO INSTALL: The heatsink part only have 2.13CM length, fit for 95% vehicles. After installation, there’s enough space for the headlight breathing. Can be installed in 15-20 minutes by yourself.
Good light output. Few design quirks. I’ll start by saying the light output is every bit as a good as fanless LED bulbs in the $35-50 range. Good light color; proper spill pattern; not much spotlighting. This is just much cheaper.The bad is the bulb is a universal design that fits many different sockets and uses an adapter to fit whatever headlight socket you have. That means you either must remove the adapter from the bulb and install it first; or try your luck spinning the bulb around and around until both adapter and…
A little homework required Absolutely GORGEOUS lighting. Obviously LEDs are LEDs, but something about these make my current car go POP (in a good way).Unfortunately I can not currently get them to stay on when the engine is running. They immediately turn off, as if a security feature in the cars computer is blocking its usage. This might be CANBUS related? Current emailing sellers support who replied much faster than I ever expected.If you know how to change bulbs already these are a no brainer…
2012 Mercedes GL350. LED replacement for H7 halogen hi beam. Had to buy adaptors for the large round housing on LED bulb that must be removed to install. Nightmarish installation but ultimately found a solution, only to discover that the illumination isn’t noticably better than the 55W OEM bulbs. Benz hi beam reflector design sucks, leaving light scattered mostly above the road surface and into the trees. Not an adjustment issue. Between the money and time I spent on this project I could have…
Comments are disabled for this post.