LED Lighting Distributors

Attention:
Tips:Under the W mode the strip will lit like Red Green and Blue, different from 5050LED which will lit like cold white, there’s no white mode for the 3528 LED.
TIPS:
This LED light controller uses 12V input power and has a 4 contact plug for a RGB strips.
When installing just line up the marked arrows.
You can choose between many different solid colors, solid white, flashing, strobing, adjust brightness, and on/off all from the wireless remote.
This simple to used 24-key IR RGB controller to control our RGB flexible LED strips.

Strip Light

– LED type: SMD 3528
– LED quantity: 300 LED
– Strip length: 5m(16.4ft )
– Light color: RGB (Red Green Blue) Flash SMD LED
– Consumption: 2.4W/m
– Input: DC 12V
– Lumens: 900LM
– Lifetime: 50,000+ hours
– Size: W10*H2mm
– Level : IP65 Waterproof,working indoor only

Package included:
1 x 5 Meter 3528 SMD RGB LED Strip Light
1 x 24 Key IR Remote Control
1 x 12 V 2 A Power Supply

Product Features

• 3528 SMD has no White Color, it is R G B color and Mixed color and every three lights color is a loop.
• Save for use: High quality 3528 SMD RGB led light with long service life, running at low temperature, low energy consumption, less heat radiation. Every 3-LED can be cut follow the cut marks without damaging the rest strip. And the lights do no harm to our eyes.
• Flexible to install: The waterproof led light strips can be cut and adjust to any length. It can be roped easily that you can carrying it convenient. 3m adhesive to attach to almost any surface flexibly as you like. Make sure that each interface is already connected, the light strip will begin to work.
• Widely Application: Led lights strip kit perfect for bedroom atmosphere decoration,TV led back light, stairs, corner and reading, camping. Suit for every festival holiday and party. Charming atmosphere always belongs to you.
• Remarks: Comes with a full 12 month warranty, 30 days money back guarantee.If the power adapter or other accessories do not work, please contact us for help. Connect the load and power lines, make sure all connection right before power switched on; Insure there is no obstacle between the IR controller and the receiver when operating; Take off the plastic sheet of remotes battery before using.