LED Lighting Distributors

SURFACE MOUNT INSTALLATION
Step1) Prior to installation. Please install two screws (furnished)into the junction box. Do Not drive screws completely to the end of the junction box.
Step2) Connect supply wires to wires in fixture wiring box with proper size wire nuts or push wires into “push-in” connector. Connect white to white, black to black, and green or bare copper wire to bare copper wire.
Step3) The ground wire at the service junction box may need to be secured to a ground screw.
Step4) With a Phillips screwdriver, attach the disk light tightly to the j-box.
Step5) Complete the installation by twisting the diffuser on the disk light aluminum enclosure and lock the diffuser in place.
Step6) The edge of the fixture and the ceiling use waterproof silicone to seal.

WARNING:
For your safety read and understand instructions completely before staring instructions. Before wiring to power supply, turn off electricity at the fuse or circuit breaker box.

1.Risk of Fire
Supply conductors (power wires) connecting the fixture must be rated minimum 90℃. If uncertain, consult an electrician

2.Risk Of Electric Shock
Disconnect power at fuse or circuit breaker before installing or servicing

3.Risk Of Fire/Electric Shock
If not qualified, consult an electrician

CAUTION
THIS PRODUCT MUST BE INSTALLED IN ACCORDACE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED

Product Features

• ● EASY INSTALLATION: Low profile and sleek LED ceiling disk/disc light upgrades the existing recessed lights to energy efficient LED with ease and flushes mount onto junction box for new construction site to avoid using recessed can; It provides surface mount light for 3” and 4” junction boxes & fire rated boxes.
• ● ENERGY SAVING: 4 inch designed, DOB, driverless, measuring at 6 1/4 inch with outer trim, operating on 120VAC, 10 Watts, over 600 useful lumens of low glare and pleasant light at CRI80+, saves up to 80% in energy consumption comparing with incandescent 60W lamp and halogen 50W lamp.
• ● GREAT DIMMING: Compatible with most of the TRIAC/ELV dimmers, smoothly dimming down to 10%.
• ● QUALITY ASSURANCE: ETL and Energy Start certified, passing strict safety and energy standard; 50,000 hours of LED life.
• ● WIDE APPLICATIONS: Ideal for entrances, living rooms, bedrooms, kitchens and dens as well as in damp and wet locations, such as bathrooms, showers or outdoors under a porch or eave and many more.