JULLISON LED DOB DISK LIGHT SURFACE MOUNT INSTALLATION:
Step1) Prior to installation. Please install two screws (furnished)into the junction box. Do not drive screws completely to the end of the junction box.
Step2) Connect supply wires to wires in fixture wiring box with proper size wire nuts or push wires into “push-in” connector. Connect white to white, black to black, and green or bare copper wire to bare copper wire.
Step3) The ground wire at the service junction box may need to be secured to a ground screw.
Step4) With a Phillips screwdriver, attach the disk light tightly to the j-box.
Step5) Complete the installation by twisting the diffuser on the disk light aluminum enclosure and lock the diffuser in place.
Step6) The edge of the fixture and the ceiling use waterproof silicone to seal.
WARNING:
For your safety read and understand instructions completely before starting installation. Before wiring to power supply, turn off electricity at the fuse or circuit breaker box.
1. Risk of Fire:supply conductors (power wires) connecting the fixture must be rated minimum 90℃. If uncertain, consult an electrician.
2. Risk Of Electric Shock: disconnect power at fuse or circuit breaker before installing or servicing.
3. Risk Of Fire/Electric Shock:
if not qualified, consult an electrician.
CAUTION:
This products must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Product Features
- 1. LED disk light makes it easy to upgrade your existing recessed lights to energy efficient LED or flush mount on junction box for new construction site to avoid using recessed can.
- 2. Provides surface mount light for 4 inch junction boxes or fire rated boxes. It is suitable for use in dry, damp or wet location such as shower room/fire box around.
- 3. 120V operation with TRIAC/ELV dimming down to 10%, >900 lumens of pleasant, low glare pleasant light.
- 4. ENERGY STAR, Saves up to 80% in energy consumption comparing to incandescent lamp, 100W halogen equivalent. cETLus Listed.
- 5. Easy installation and instant on make you feel convenient and different from what you used to have for light up your room.
Taking them for a spin I just got these (8pk/4000k) and installed 4 in my room. No clue on the quality yet, but they lit up to my expectations and even worked with a leviton dimmer (dsl06).I am mainly posting this review right now to share the pictures that I wondered about before I ordered these particular lights. The pictures show the size of the over all light with trim, the size of the LED array, the halo when dimmed (not sure how dim), and the wiring on the back.There is no UL sticker,…
Great lights but very bright.
Comments are disabled for this post.