')){kind=link}
KAWELL® – Let Hi-tech Light up Your Way.
KAWELL universal wiring harness kits is designed for LED Offroad Driving light LED lamp fog light work light and up to 20″ LED light bar.
Universal Fitment:
Compatible with all vehicles or boats that use a 10-30v DC power source. Basically any car battery will work on this wire harness. Just connect your lights to your batter and flip the switch.
6.5 ft wiring ( from relay to lights 6.2 ft , from switch to relay 9.2 ft)
The length of this wire harnesses will allow you to mount your LED lights to nearly anywhere you want. Just run the harness from the battery to your desired lighting location.
Other features:
1, High quality 40 amp power relay.
2, 30A blade fuse, max rated at 30A.
3, Illuminated on/off switch with 3M tape.
5, Easily connects any lighting accessory to its power source by taping into the battery directly.
6, LED lights are expensive and in all cases should be protected against melt / fire / smoke or burn out.
7, IP67 waterproofing rating.
Complete Wiring Kit Includes:
1, Wiring harness
2, 40A power relay
3, 30A blade fuse
4, ON/OFF switch with 3M tape (On/Off)
5, Instruction
Available in:
Dual light harness – mounts up to two lights.
If you need Heavy Duty wiring harness for up to 300W light bar, please kindly visit our KAWELL Store to select.
Product Features
- Universal fit: designed for any LED Offroad Driving light LED lamp fog light work light. PREVENT from melt / fire / smoke or burnout along with your application.
- Premium quality: double lead 6.5 ft copper harness ( from relay to lights 6.2 ft , from switch to relay 9.2 ft), includes 40A power relay, 30A online blade fuse and illuminated ON/OFF switch with 3M tapes.
- Details: IP 67 weatherproof rating, replaceable relay, high quality waterproof fuse, switch with 3M tape backing for easy mounting.
- Easy to install: just plug and play, compatible with all vehicles or boats (10-30 V). Please notice both lights will not exceed 130W
- 100% SATISFACTION GUARANTEE: KAWELL Brand no reason for return or change, hassle free 12 Month warranty.
Related Posts
ELINKUME Led Grow Light Bulb GU5.3 MR16 110V 3W Plant Grow Light for Greenhouse Hydroponic Aquatic Specification: Item type: Led Grow […] Posted in LED Grow Lights
LE 5m/16.4ft 300 LEDs RGB Strip Light Kit, SMD 5050, 12V DC, LED Tape lights, Remote Control, LED Ribbon Lights for DIY Christmas Holiday Home Kitchen Car Bar Indoor Party Decoration (Waterproof) Ready to UseThis light strip kit comes […] Posted in LED Lighting
Parmida (12 Pack) 5/6 inch Dimmable LED Retrofit Recessed Downlight, 15W (120W Replacement), Baffle Metal Design, 1000lm, 3000K (Soft White), Energy Star & ETL, LED Ceiling Can Light, LED Trim Product Specifications
No UV or IR […] Posted in LED Lighting
Acceptable I used this kit on my Isuzu Trooper and it suited my needs, but just barely. I actually used it to wire my factory fog light switch rather than using the supplied button. This meant that I had to run the white wire from the relay to the switch across from the battery to the drivers side, then pull it thru the hole in the firewall. The wire was not long enough and had to be extended. Also, the wires leading from the relay to the first fog light were barely long enough. I could have…
Well built, make adding lights a breeze This harness is great for the smaller wattage rated LED lights. It’s a shorter harness and is more of a light duty type for use with two 18w-27w LED lights. I used this harness for the windshield hinge lights on each side of my jeep. I didn’t need a long heavy wire harness for this area. The lights are so close to the power source and switch placement. This harness was very easy to install for the application it was used. I couldn’t build one as fast or what this cost. As with most of these…
Good Deal, but watch connection points at relay
Comments are disabled for this post.