Unique design LED sensor light for wardrobe/cabinet/closet lighting.
Specification:
Voltage: 4.5V
Power:1W
Lumen: 50lm
Battery: 3*AA
Material:ABS/PC/Fe
Sensor Range:100 degree 3 Meters
Operation:
1.To activate the PIR sensor, switch to “AUTO”,
2.Revolve the light to face the illuminating zone towards area to be lighted.
3.Revolve the sensor part to face the PIR sensor towards walkers’ incoming direction.
4.PIR sensor range is 3 meters and sensing angle is 100 degree.
Attentions:
1. Please don’t use it in humidity as it is not tested by professional water-proof test.
2.Please choose installation position carefully as sticker is strongly sticky and hard to remove.
3.You are advised to use alkaline batteries of good brand or high-capacity rechargeable batteries.
4.Please check if the batteries are placed in wrong direction or if they are dead if the light doesn’t work.
5.Please take out the batteries and switch to “OFF” if long period of no use.
Component List:
Light X1
Screw(3*10mm) X2
Screw(3*20mm) X2
Anchor(6*28mm) X2
Product Features
- Motion-activated energy saving LED closet light; Equipped with Light Sensor and PIR motion sensor,automatically on when detecting movement within 3 meters in 100 degree angle, Automatic turn-off 15 seconds after movement stops
- Auto/On/Off button; Auto for motion-sensitive mode,ON for constant light mode, OFF for switching the device off
- Motion sensor closet light requires 3 PCS AA size battery (excluded); Suggest to use high-capacity rechargeable batteries. Battery life: 2.5 year/standby mode, 14 hours when continuous lighting, 2 years if light activated 10 times per day, and 15 sec per time
- LED Power : 1W , Lumen: 50lm, Bright White Light
- Package come with Magnetic Base, Adhesive tape and screws for your convenient mounting choice
Love this Motion light, may be littler in size however radiates a splendid light (Luminous Flux 50Im) and the normal life is 100,000 hours. It accompanied composed guidelines that were anything but difficult to take after. Simple to set up, simply opened battery entryway on the back of the light and embedded 3 AAA batteries (basic) that were excluded with the light and set up the battery entryway back. (Note: The directions recommend that you utilize soluble batteries from a decent brand or…
Comments are disabled for this post.