Important Instructions:
As the bed light is light sensitive, so it will only turn on in very dark environment and will not work when it can sense light.
The sensor should be installed at the place where away from possible interference like: direct sunlight, strong air flow (like fan, air condition etc), Electromagnetic radiation.
What Included:
AC Power Supply X1 PC
Sensor X 1PC
1.2M LED Strip X1PC ,
Connector and wire fixing seat X 1Set
Specification of Power Supply:
Input: AC 100-240V ,0.5A
Output: 12V,1A
Easy Installation
1.Clean up the surface, make sure the paste place under the bed frame is free from dust before installation to avoid falling off
2.Remove the 3M adhesive on the strip
3.Stick the bed light LED strips down the bed frame with the 3M adhesive tapes
Product Features
- Quality Assurance – 100% satisfaction guaranteed, one year warranty
- Smart Nightlight – When stepping out of bed, a Warm soft glow of light will turn on to guide you safely across the room in the dark, no fumbling to find the light switch in the dark, also no disturbing glare to wake others
- Energy Saving – Only light up when it picks up your movement, auto shut-off after leaving, further improved power efficiency and save energy
- Motion Activated — Built-in human body passive infrared (PIR) motion sensor light with automatic shut-off timer; Adjustable Time -Motion sensor Auto shut-off timer can be set from 30 seconds to 10 minutes
- Multi Purpose -The flexible strip light come with strong adhesive tape for anywhere need extra light at night, ideally for bedroom night light, kid’s night light, baby’ nursery night light, also can be installed in kitchen , indoor stairs , bathroom, TV, and more
Very useful, works fine. This is such a useful device. We use it under our double bed. I wake up a couple of times at night and these sensors are great, there is a slight delay in their motion detection (a few seconds) but the light is quite subtle and doesn’t wake up the hubby.NOTE: First time the lights in the led strip just flashed and then went off when we plugged them in. We thought we had received broken ones. But then we realized that the ambient light was bright enough that the lights would not be…
I like being able to walk into my bedroom and lights … The lights work as advertised. I like being able to walk into my bedroom and lights come on under the bed. It looks cool and is very functional. It’s very easy to install except for one major problem. There was no sticky tape on the back side of the lights. I peeled off the paper strip slowly only to discover that there was no way to stick the lights to the underside of the bed frame. I had to make an additional purchase of double sided industrial strength tape to install the lights. That…
Every Thing About This Lighting Is Good But The Glue Strip On The Back of LED That Does not Exist. You need To Buy Putty Glue Or Use Mounting Staplers. Be Aware That Installing The Sensor During The Day Would Not Allow You To See Lights Turn On , Only At Dark Room it Will turn On.The Lights Are Bright & Good., Sensor Is Good & Works So Far Good. The Only Thing I would Recommend To Manufacturer Is Increase The Wires From Charger To Sensor & from Sensor To Light By About 3 Feet Each Side…
Comments are disabled for this post.