ANNT 20″ 126W LED Work Light Bar (20″ from end to end). Best combo beam in the market.
Specification:
Power: 126W
Operating Voltage: 10-30V DC
Color: Black
Color temperature: 6000K
Waterproof rate: IP 67
42PCS*3W high intensity LEDS Current draw
Material:Decals aluminum housing
Mounting Bracket:Stainless Steel
Beam Type: Flood & Spot Beam Combo
Beam Angle: 60° / 30° (FLOOD 60°; SPOT 30°)
Dimension: 495mm*65mm*71mm (20inch*2.5inch*2.8inch)
Material:Aluminum Casing,Aluminum Alloy hardware
30000 hours above life time
Applications:
The ANNT work light can be compatible with almost all Jeeps, 4×4, Trucks, Motorcycles, SUVs, ATVs, Cars, Boats, etc. Many indoor and outdoor uses: Garden Lighting, Backyard Lighting, Back-up Light, Off Road Lighting, Construction Lighting and so on.
Warranty :
For any possible defective products, please do not hesitate to contact us by email and we will do our best to solve the problems for you.
Product Features
- Perfect Design: ANNT Led light bar is made of 42*3W LEDs, 8820LM , 10-30V DC voltage.
- Excellent Waterproof: The waterproof rate is IP 67, great performance of waterproof, dust-proof, quake-proof.
- Widely Application : You can apply to different types of trucks, Off-road vehicles, 4×4, Military, Mining, Boating, Farming, and Heavy Equipment etc.
- Long Service Life: This is a heavy duty light bar is meant to go with you; don’t use a bad light that will fail on you when you need it most. ANNT light bar has a lifespan of more than 30000 hours.
- Package Content: 1 X ANNT 126W Spot light bar, including installation tools (mounting bracket + screws).
20″ Light Bar built to last like high end brands but not sold for high end prices! The ANNT 20″ LED Light Bar looks to be built to last and to handle the elements. The lens looks like it is sealed very well though I will be adding an extra line of silicon just to be safe as I do with all of my aftermarket lights. The back of the light bar is “finned” to keep it cool during operation. There are 42 * 3w LED lights to equal a total of 126watts of power. The cord that is attached to the light is about 18inches long…
100+ Feet easily Great light bar with a heavy duty build. The bottom mounting pieces came loose so it can easily be set to whatever width is needed for your mounting surface and then be tightened down. The 2 mounting brackets that attach below that adjust tilt and direction of the light by being loosened and tightened. I am running the bar with a 10 amp inline fuse using 10 gauge and 14 gauge wire on a 12 volt battery. It easily lights up to 100-150 feet in my…
Don’t forget a wire harness ANTT sells them too, a good alternative to high end Led bar light, outputs good amount of light, Updated with the last two pictures, taken in total darkness, first picture is from the light bar only, the last is headlight with light bar both on.There are really no limits to where this LED light bar can be used. This light bar is intended for mounting on my Isuzu Rodeo 4×4 SUV. Since I use my vehicle for launching a small boat before sunrise four times a year, I really canât justify spending over a hundred dollars on a high end CREE light bar on a fifteen year old vehicle…
Comments are disabled for this post.