Application:
Widely used for home decoration, hotels, clubs, shopping mall
Architectural decorative lighting, boutique atmosphere lighting
Extensively applied in Back Lighting, concealed lighting, channel letter lighting
Emergency &lamp; security lighting, advertisement sign lighting
Decorative lights for holiday, event, show exhibition
Applicable for automobile and bicycle decoration, border or contour lighting
Description:
LED Type: 5050 SMD LED RGB, IP22 not-waterproof
Length: 16.4FT (5 Meter)
LED Quantity: 150LEDs / 16.4FT
Beam angle: 120 degrees
Input voltage: 12V DC
Output power: 24W /5 Meter
Working Tempreture:-20℃ to 50℃
Power Supply: Input:AC110-240V; Output: DC 12V/2A
HOW TO USE DIY:
1. Press a DIY button, for example DIY1. 2. Hold one of the down colored arrows for about 8 seconds until you notice a change. Then try holding down another arrow. The DIYs start out as white because white is made up of RGB. The arrows essentially add or subtract color.
3. After you have the desired color, press the same DIY button again to save it. To cancel the change, press another DIY button instead.
Package Contents:
1 x 5m 150 LEDs Strip (not-waterproof)
1 x Remote Controller
1 x IR Control Box
1 x12V,2A Power Supply
1 x User Instructions
Please note that this strips should unwrapped before powered. Otherwise it will overheat soon. But if you keep it unwrapped before using, it will not get hot anymore and works under normal temperature.
Product Features
- 【Complete kits including】: 1pcs 150 SMD 5050 LEDs 16.4ft/5m not-waterproof RGB strips, 1pcs 44 key IR remote controller, and 1pcs 2A 12V power adapter (US Plug) are included. 1pcs User Instructions
- 【Quick And Easy Installation】: Plug and play without wiring. Self-adhesive back tape for secure and easy application for any clean, dry and flat surface. and it can stick to most of the dried material (except lime walls, etc.)
- 【Colorful Modes】: SMD 5050 has three main colors: red, green,and blue , and 16 extending colors. up to 6 flashing modes is available, including fade & strobe, brightness and different speed settings., easy and smart . meet your different needs. It provides users with the DIY setting. The control box is designed with memory functions, so it can store the last color mode you set
- 【Cuttable】: The color changing LED strip lights can be cut every 3 LEDs along the cutting marks, without damaging the rest strips
- 【Satisfaction Guarantee】These lights come with a 12 month warranty. If you are not completely satisfy or have any questions,pls do not hesitate to contact us,our Excellent Customer Service is ready to respond within 24 hours and make you with No Worries after buying it.
Good looking, easy setup, but EXTREMELY noisy (electrically) I bought these to add some light to a room with no overhead lighting and to see how they worked/looked. I opted to use the full length rather than trimming the strand and mounted the set near ceiling level in order to achieve the best light distribution.What’s good:The 10 meter length is ample and ran further than I expected.The strip is flexible and doesn’t seem too unusually fragile.- My kit had 3M adhesive on the entire strip which, so far, holds rather well to…
Way cool lights These lights have been a LOT of fun for my son. He seems to want a night light on all the time. I thought I would do something really fun by getting these. The light strip is about 16 feet long which is just long enough to wrap around the perimeter of the bunk bed. The light strip does have a peel’n’stick backing, but I didn’t want to stick it directly to the wood and peel the finish, so I just tucked it under the frame of the upper bunk so it would shine down on his bed. HE LOVED…
Comments are disabled for this post.