Loncur LED Strip Lights, 32.8FT 300LEDs RGB Light Strip with 44 Keys IR Remote, Controller Box, 12V/3.5A DC Power Supply
and 20 Colors Changing Feature Ideal for Decoration (Non-waterproof)
It makes your life better!
This Loncur LED strip has 20 basic colors, and it is an IP20 non-waterproof lights kit.
Easy Installation
Simply tear the blue tape behind the strip light and stick it to wall or other smooth surface.
Note: you need to use blown-sponge (not included in the package) if the surface is rough.
Save Energy with Low Heat Emitting.
This strips circuit board is DOUBLE-LAYER designed by professional factory,
which make sure that it is high quality and with low heat emitting.
Adaptor Specifications:
Input: AC 100 – 240V
Output: DC 12V, 3.5A
Material: PC
Please Note: The arrow which at the end of IR control box
and the “+” on the strips should be connected on the same side.
The sensor of the IR controller box has a radiation range of 180°.
Note: The 44-key remote should face the sensor of the controller box, otherwise it won’t works.
SAFE TO TOUCH:
The power supply which is ETL listed and tested by precise, high standards and made by expensive materials.
And for the materials and 12V working voltage which makes the strips safe to touch when using it.
DIY Cutting
Loncur Led strip light can be cut between every 3 LEDs without damaging any of the rest strips.
Which makes the installation mach easier.
What You Get
1 x Loncur LED Strips(10m)
1 x 44 key remote controller
1 x IR control box
1 x power supply
1 x user manual
10 x Card Buckle
Buy now!
Product Features
- ▶10 in One LED Strips◀: The LED strip light is 5050 RGB strip lights with 300LEDs in 1 roll of 32.8ft/10M long has 12V 3.5A Full Working Current, 44 key IR remote and controller box, 20 Flexible Changing Colors, 8 light pattern,6 DIY light modes and Adjustable brightness function. And it has double layer copper, extra adhesive tape, energy saving 95% and over 50000hrs lifespan!
- ▶20-Color & 8 Pattern & 6 DIY Modes◀: This 5050 RGB Led strip lights kit can change colors and speed automatically. It has 20 multicolored options, 8 light modes and 6 DIY selection to create your great led mood lighting. The lights are very suitable for living room, kitchen, cabinets, cars, bedrooms, parties, Christmas or weddings.
- ▶Safer and More Convenient◀:Loncur 5050 RGB LED strip light which has energy-friendly lights because of the 12 volt adapter. It is safe to touch and has short circuit protection and memory function which makes sure the safety for adults and kids.
- ▶Easy Installation & Extra adhesive tape & Ultra bright◀: The strip lights can be cut between every 3 LEDs. Extra adhesive tape can be fit on any dry and flat surface very easy to install. High-quality LED chip allows the LED strip lights up to be ultra bright, colorful and durable.
- ▶Package Content& Guarantee◀: 1 xLoncur LED Strips(10m); 1 x 44 key remote controller; 1 x IR control box; 1 x power supply; 1 x user manual. The LED strip lights come with a 12 month warranty. If you have any questions, our friendly customer service is always stand behind you and reply all email within 24 hours, please don’t hesitate to contact us.
This multicolored LED accent lighting strip is one of the coolest additions I have made to our home in years. I don’t like harsh yellow or the sickening look of fluorescent bulbs they just aren’t pleasing to the eyes, so having these LEDS in our bedroom has changed the way we hangout and even helps make my mood better. It has been proven that a pleasing light is much better for stress levels and anxiety than harsh lighting. This LED lighting strip allows you to choose the lighting color and…
I wanted to get some LED lights for under the kitchen counter, and while this would work perfectly for that, I ended up using it in my bedroom behind my work desks where I’ve found it’s usually dismally dark. The main reason for this change is that this is a LOT of lights at 32 feet!! I initially misunderstood it to be 32 inches but it is far longer. This means you’ll probably have a lot left over for other projects, but if you’re a newbie like me, know that you’ll have to purchase connectors…
Comments are disabled for this post.