){kind=link}
* Infrared detection controller, adopt infrared detection way to control load switch
* You can install the human body sensors in the appropriate environment according to actual needs
* LED Lighting motion sensing switch which provides 1 to 10 minute OFF delay timing function
* The sensor switch activates ON when a body in motion enters the field of view with an ON time hold that is adjustable from 1 to 10 minutes after motion has ceased
* PIR (Passive InfraRed, IR) sensor has an effective range of 16 feet and diminished sensing of a moving human body to 26 feet
* The field of view of the PIR Dome Lens is 60 degrees nominal
* The switch operates on 12 or 24 volts DC and can switch up to a 6 amp load
Specification
* Item name: body sense infrared led strip controller
* Power supply voltage: 12-24V
* Output voltage: 12-24V
* Max load current: 6A
* Induction range: 8m
Package includes
1pc * PIR-8 body sense infrared led strip controller
Product Features
- Infrared detection controller, adopt infrared detection way to control load switch
- LED Lighting motion sensing switch which provides 1 to 10 minute OFF delay timing function
- The sensor switch activates ON when a body in motion enters the field of view with an ON time hold that is adjustable from 1 to 10 minutes after motion has ceased
- PIR (Passive InfraRed, IR) sensor has an effective range of 16 feet and diminished sensing of a moving human body to 26 feet
- The field of view of the PIR Dome Lens is 60 degrees nominal
Related Posts
RGB LED Strip Lights 32.8ft SMD 5050 LED Rope Lights, Dorm Lights Color Changing Lights with 28-Keys RF Remote Controller for Home Room Decoration (Sync with Music, UL Listed 12V Power Supply) Package content:
2* 5 meters LED […] Posted in Rope and String Lights
Spectrum King LED Series 400+ 400 plus 400w Indoor Hydroponic Grow Light 110v-277v Ac OVER 20% MORE LUMENS, SAME WATTAGE!!! […] Posted in LED Grow Lights
Anzo USA 311095 Toyota Land Cruiser Red/Clear LED Tail Light Assembly – (Sold in Pairs) A complete kit for simple plug and […] Posted in LED Tail Lights
I was looking to add motion activated LED lighting in my bath vanity to light up my sink area for washing hands and in the cabinets. I purchased the Sensky BS010 and tested the unit with a 36w/3a/12v power supply and with a load of about 5w of LED strip lighting. Immediately after plugging it in the lights popped on. The BS010 unit started to smoke slighting but stopped after a moment. I adjusted the delay sensor but the lights would never shut off.I double checked my connections and…
Comments are disabled for this post.