){kind=link}
NOTE:when the light color are not match the remote button color,what we can do?
you just need 3 steps:
1.turn on the strip light,make sure the controller connect
between the strip and power supply
2.press the red Shutdown key,and then press”FADE7″ button.
3.Repeat these two actions again until the Color matching.
THE IMPORTANT MODE: AUTO mode, when you press this button, all of the color will alternate display,
The gift for your home!!!!
LED Q’ty: 300pcs * SMD5050 RGB LED
Tape Length: 16.4Ft/5m
Working Voltage: DC12V
IP rating: Waterproof IP65
Easy Installation. Plug and play without wiring.
Self-adhesive back tape for any dry and flat surface
Extremely low heat. It is touchable and safe to children.
Package included:
1x 16.4Ft/5M 300LEDs 5050 RGB Waterproof LED Strip
1x 44Key RGB IR Remote Controller
1x DC12V 5A Power Supply
Application
1. light up colorful home life ,DIY household lights for hallways, stairs, trails ,Widely used for home decoration use, hotels, clubs, shopping malls,
2.Emergency and security lighting, advertisement sign lighting,
3.Architectural decorative lighting, boutique atmosphere lighting,
4.Decorative lights for holiday, event, show exhibition,
5.Extensively applied in Backlighting, concealed lighting, channel letter lighting,
6.Applicable for automobile decoration, border or contour lighting.
Warm prompt:
the connector between the light strip and IR receiver must be
in towards the arrow .Please advise us if you have question.
Product Features
- The gift for your home!!Easy Installation. Plug and play without wiring, IP65 not mean can be used directly in the water
- THE IMPORTANT MODE: AUTO mode, when you press this button, all of the color will alternate display, and you needn’t to press the other button. LED strip light,waterproof 5050 RGB LEDs in 16.4Ft with dimming and brightness controls, with a 5A 60W Power adapter
- DIY FOR YOURSELF!!Cuttable Every 3 LEDs along the cutting marks, reconnect with connector ASIN:B0739LQHKT , all kinds of effect you want,”T””L””+”connector and strip light mounting Brackets with screws
- LED IR remote controller with over charging and short circuit protection, memory function
- The width of the strand is 10mm,Self-adhesive back tape for any dry and clean surface.
Related Posts
Surface Mount 20W 4-LED Emergency Warning SYNC Strobe Light Head Car Truck 12V-24V (4pcs, White & Amber) Specifications:
• Condition: Brand […] Posted in LED Lighting
AlphaRex 6000K Xenon/Black 09-14 For Ford F150 LED Tube Dual Projector Headlights with Switchback DRL/Sequential Signal/Activation Light Fitment:
09-14 Ford F150 (Does not […] Posted in LED Headlights
WYZworks 150′ feet Blue LED Rope Lights – Flexible 2 Wire Accent Holiday Christmas Party Decoration Lighting Features:
- Versatile, affordable, […] Posted in Rope and String Lights
These are extremely bright pure white light. I was looking for led strip lights that are bright and pure white light.Too many strip lights are the 3528… which are not bright. I’ve ad 5050 and those are good too but 5630’s are newer and brighter.These are nice and the price is perfect!Super bright, and so far so good. I used these under my garage cabinets for lighting over my workbench. Be advised that the adhesive tape on the bottom side is OK at best… it doesn’t stick to everything and since…
Very bright and easy to customize if you know how to solder
This product is exactly as advertised. I installed them in early May of 2016 in a commercial setting for outdoor use. The color and brightness was amazing (first photo). However, after four months of use (roughly 4-6 hours per night) the color shifted from bright/daylight white to warm white/yellow. I don’t believe there is any issue with the resin, as it still appears to be clear when the lights are off, so the color shift is in the actual LEDs themselves. Additionally, the strips are spliced…
Comments are disabled for this post.