LED Lighting Distributors

Packing Content

2 x Motion Sensor Light
2 x Mounting Accessories Kit (include 2 screws,2 Sleeves)
1 x User Manual
8 x Dual Adhesive Tape

Operation Instructions

1. How to install the device
   Use the supplied screws or stickers to mount the device on fixed surface outside where you want for lighting

2. Charging via solar panel
   Install the unit faceing south and make sure the solar panel can get direct sunlight.
   Normally it can be fully charged in one day under bright sunlight.

3. Motion Sensor

   Select an appropriate mode:
   Mode 1: No light when no motion, bright light activate when detecting motion within 16ft, shut off 15 seconds later
   Mode 2: Dim light when no motion, bright light activate when detecting motion, returns to dim light 15 seconds later
   Mode 3: Steady On -Turn on automatically at night and stay at the stage of half bright light
   Mode 4: Switch off

Caution:

1. This light is solar powered, it would be much better to install it in place with adequate sunlight.
2. Charging time and speed depend on the amount of direct sunlight.
3. If you plan to use the light in a shaded or indoor area, choose a battery powered motion sensor light.
4. Do not disassemble the unit.
5. For the first time use, charge the solar product by placing it under direct sunlight for more than 8 hours before using.
　

Product Features

• INSTALL EASILY IN SECONDS: Use screws or adhesive pads to secure the solar motion sensor light to any surface(bricks, stucco, siding, wood, metal, glass etc.). No Wiring Needed, Solar energy powered.
• 3 MODES OPTIONS: Provides 3 different intelligent modes for meeting different needs to save energy.
• EXTERNAL WATERPROOF SWITCH: Instead of pinhole switch, makes operation easier. Auto on at night / Auto off at sunrise
• LONG WORKING TIME: With 20 LED lamp and its brightness is 320lm, built-in 2200 mAh rechargeable 18650 lithium battery and lasts 12 hours after 8 hours fully charged.
• PROTECTION DESIGN: The circuit board is coated with 3-resisting lacquer, which is insulated, damp proof, shockproof, dust-proof, corrosion proof, anti-aging, anti-corona, anti-creeping. The back side of the solar light is completely sealed so it can effectively isolate water and mist.