Feature:
LEDUR Auxiliary Lights provide more usable light further
High transmission spot light projector lens for maximum visibility in foggy weather
360°universal adjustment mounting bracket
Specification:
LED type:CREE LED Chips
Power:40W(20W/per Auxiliary Lamp)
Voltage:12-24V DC
Lumen:4000Lumen(2000LM per Light)
Beam type:spot beam
Color Temp.:6000-6500K
Waterproof:IP68
Work temperature:-45?-85?
Warranty:1 year guarantee
Application:
BMW K1600 R1200G F650GS F700GS F800GS Motorcycle Benelli TRK 502 ADV and other universal Motorcycle,electrombile.
Light assemblies mount easily on any pre-drilled holes atop headache racks, bumper or grille guards
Package Included:
2x LED Auxiliary Light Kit for BMW Motorcycle
2x Protect Guards
1x Switch Wiring
1x Screw Driver Tools Set Kit
1x LEDUR Installation Diagram
Product Features
- WIDELY APPLICATION -Motorcycle BMW K1600 R1200GS F650GS F700GS F800GS,also used for universal Motorcycle Auxiliary Light.
- HIGH QUALITY+LONG LIFE TIME+ADJUSTMENT BRACKET – Made of CREE LED chips, Aluminum Housing,PC lens,12V-24V DC,40W 4000Lumen.Service life over 60,000 hours,IP68 waterproof.360°Adjustable(the Left and the Right )+180°Adjustable( Up and Down ).
- COME WITH INSTALLATION INSTRUCTION & EASY TO USE -The installation process is very quick and will take about 15 – 20 minutes.Plug and Play,Super Bright.
- PACKAGE INCLUDED -2x LEDUR Auxiliary Lights + 2x Protect Guard+ 1x Switch Wiring+Screw Tools Kit+LEDUR Installation Diagram.
- BUY WITH CONFIDENCE -Worry-free 1 year warranty and 24 hours support on business day from LEDUR.
Decent lights I bought these to mount on my ’06 KTM 950 Adventure. They definitely light up the dark places that I couldn’t really see before. They don’t turn night into day, but they do enough to see what’s on the side of the road. I like that they are easy to adjust and the wiring kit is a big plus. I just mounted the lights, routed the wires, mounted the switch and attached to the battery, very easy.Dislike: the red light on the on/off button died the very first day. But the lights…
Inexpensive, but cheap Not mounted yet, but with mixed reviews, I thought I’d try to see where the problem spots are.A first glance shows the screws into the mounting brackets are too long and could damage whatever bar they clamped to. Easy fix to either shorten or replace with shorter ones. I might elongate the holes and use a hex head (instead of phillips) so a little left/right adjustment is possible. When you pull it apart, you’ll notice a bit of silicone sealant was used around wires and…
Comments are disabled for this post.