Designed for the average home owner as well as lighting professionals, these flexible LED strips can be used for architectural lighting, sign letter lighting, concealed lighting, perimeter lighting amongst many other applications. They are a cool and efficient way to decorate tables, TV rooms, bedrooms and closets. They can also function as eye catching special effects at stores and expo booths.
These competitively priced standard strips are great for experimentation and the budget-conscious.
Specifications
* LED Quantity/Type: 300xSMD3528
* Input Voltage: 12VDC
* Power: 24W
* Beam Angle: 120°
* Available Colors: Available Light Colors: White (5000-6500K) | Neutral White (4000-4500K) | Warm White (3000-3400K) | Warm White (2700-3000K) | Red | Green | Blue | Amber/Yellow
* Light Output (lumen): 900-1100
* CRI: 70
* Operating Temperature: -25~60ºC
* Strip Width: 8mm
* Length: 16.4ft (5m)
* PCB Color: Copper
* IP Rating: IP33
Note
* Minimum bending diameter: 5cm (2″).
* Do not lengthen the LED strip by directly connecting additional strips to it; additional lengths should be wired in parallel.
* Unroll LED strip completely before powering on.
* Unused wires of the LED strip must be isolated.
* Test all components before cutting or permanently mounting the strip.
Product Features
- Efficient LED strip with 300xSMD3528 LEDs
- Cuttable every 3 LEDs, approx. every 2″, at designated cut marks
- Cut sections may be linked via optional quick conectors or directly soldering wires
- Dimmable with optional compatible dimmable transformer and wall dimmer switch or PWM dimmers
- Eco-friendly – uses very little energy, without harmful radiations
LEDs Are Much More Than Expected! I ordered this 5 Meter reel of 300 LEDs hoping that they would be bright enough to serve as under-cabinet lights to brighten my counter tops. Not only are they bright enough, they can be cut into sections as small as 2″ (with 3 LEDs) and put just about anywhere. With simple soldering skills and some light gauge wire, it is possible to place these light strips into just about any configuration.A single strip of these LEDs are bright enough to make the countertop bright, but my…
Good; here’s more technical data In brief use this product is working well. Some technical data you may find helpful:1. Product is 10 pieces of 0.5m flex, with 30 LEDs each, joined end to end by solder, with continuous adhesive backing.2. Product can be cut at each 3-LED increment, marked with a silk-screened dash. (Each increment has 3 LEDs and one resistor, in series)3. Solder pads are present at every 3-LED increment, though soldering to the existing “joins” every 0.5 meters will be easiest because they…
Electrical & mechanical data. Great light but lousy termination system I wanted to buy some of these “light ropes” to put under my kitchen cabinets. Being the electrical engineer that I am, mostly power supplies, I found that there was a dearth of information about the things. I decided that I would take some data and take a few pictures to make it easier for people to understand more about them. I have submitted six pictures which you can find labeled “Fig. X”, where X is 1-6. You can refer to them to help you understand my written description. I’m a big…
Comments are disabled for this post.